Question about SanDisk Sansa c140 MP3 Player
With my sandisk c140 mp3 player, the screen stays on one song. the song doesnt play, and you cant switch songs or do anything at all. i tried taking out the battery and putting it back in, but that didnt work, it still shows up with the same song stuck on there when i turn it on. i also tried plugging it into the computer, it was not detected at alll. Any ideas? Thanks!
Have a sandisk 1 GB MP3 player that keeps showing SANDISK at startup. Wasn't able to shut it down.
By pressing volume + toegether with center select, I managed to shut it down. Now it works fine again. Thank you for the tip!!!!
Posted on Feb 01, 2008
Try a "hard reset". Press and hold the power button for 15 seconds to shut off. With the device off, press and hold the vol + and the center select button. Power it back on, see if that works. You can add to the question if you have more questions. Best of Luck.
Posted on Sep 30, 2007
You might have to hold the power button down for like 20-25 seconds and if that doesnt work what I would recommend you to go to the sandisk site to update the firmware on your device or you can contact sandisk to they can help you with updating the firmware on your device..Please follow the link below to get the firmware
The number for sandisk is 1-866-726-3475
Please rate accordingly
Posted on Apr 07, 2008
Tips for a great answer:
Sep 29, 2009 | SanDisk Sansa c140 MP3 Player
Sep 28, 2009 | SanDisk Sansa c140 MP3 Player
Apr 07, 2008 | SanDisk Sansa c140 MP3 Player
Aug 15, 2007 | SanDisk Sansa e260 MP3 Player
Apr 07, 2007 | SanDisk Sansa c140 MP3 Player
559 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: