Question about Fax Machines

1 Answer

TAD erase and record greeting message

Recently purchased this secondhand message centre.model KX-FT37 Everything working well, just cant delete the previous owners TAD greeting message and then record a new one. No user manual available. Can you help please. Thanks Lee

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 69 Answers
Re: TAD erase and record greeting message

Just record a new one, it will overwrite the previous message

Posted on Oct 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Erasing Memory from KX-FHD332

Follow page 65 and 72 of Panasonic KX FHD332 Operating Instructions Manual

Memory full
When making a copy, the document being stored exceeds the memory capacity of the unit. Press {STOP} to clear the message.
Divide the document into sections.

Fax/memory full
The memory is full of received documents due to a lack of recording paper or a recording paper jam. Install paper (page 14)
or clear the jammed paper (page 72).
L When performing memory transmission, the document being stored exceeds the memory capacity of the unit. Transmit the entire document manually

Mar 11, 2016 | Panasonic Fax Machines

1 Answer

How do I delete a recording on my JNC Digital Recorder?

I'm not sure about that particular model, but usually you can press ERASE as the message is playing.
On some other models you have to press ERASE at the end of the message you wish to erase.

In either case, right after you press ERASE it will ask ERASE? (or FILE ERASE? ) then you press ERASE again.

Just make sure to experiment a bit so you don't erase a wrong and important recording by mistake.
I don't believe it can be recovered.

May 25, 2011 | Fax Machines

1 Answer

I have a Brother Fax 2820 at home. It is connected to a TAD. I want an external fax machine to send and bypass the voicemail greeting and print the fax. I thought I set the machine to TAD. Any other...

try this paul. hook your phone line from your wall jack to your "line" jack on your fax. then run another phone line from your "external" jack on your fax to your "line" jack on your TAD. now, make sure your fax machine is still set to TAD. here is whats important...set your TAD to 4 rings or less. 2 is the recommened setting. also very important...when you record your outgoing message on your TAD, make sure you leave about 5 seconds of silence before you start recording your message. the reason for this is the fax machine needs to "hear" the CNG tones that originate from the sending fax so that it knows its a fax and then can take over the call. if it doesn't hear those tones because of noise (voices, etc), it will let call go to TAD. you can try to set your TAD to 4 rings, but that doesn't leave much time for fax to "hear" these tones. if you set to 4 and don't get all your faxes, try lowering the setting to 2 or 3 rings.

good luck and hth,

Mar 02, 2011 | Brother IntelliFax-2820 Laser Fax

1 Answer

I have a Uniden cordless answer machine,Can my meesages be retived?

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new greeting message.
  1. Call your telephone number.
  2. During the greeting message, press 0 and enter your PIN code. By default, the pin code is "80" without the quotes.
  3. The answering system announces the current time and the number of messages stored in memory. Then you hear "To play incoming messages, press zero two. For help, press one zero".
Available commands are:

  • 0 then 1 Repeat a Message
  • 0 then 2 Playing Incoming Messages
  • 0 then 3 Skipping a Message
  • 0 then 4 Deleting a Message
  • 0 then 5 Stop Operation
  • 0 then 6 Answering System On
  • 0 then 7 Memo Record/Stop*
  • 0 then 8 Greeting Message Record/Stop*
  • 0 then 9 Answer System Off
  • 1 then 0 Help Guidance

Jan 23, 2011 | Fax Machines

1 Answer

Recording a greeting


You need to be in Tam fax mode firstly.

1, {#} {0} {0} {1}:= “TAM/FAX” (default)

Press {RECORD} repeatedly to display “TAM GREETING”.

Press {SET}. A long beep will sound.

Speak clearly about 20 cm ( 8 inches ) away from the microphone.

The display will show the remaining
recording time.

5 When finished recording, press {STOP}.
The unit will repeat your message.

To erase and start again

Tam/fax mode again.

2 Press {ERASE} repeatedly to display “TAM GREETING”.

3 Press {SET}.

To cancel erasing, press {STOP}.
4 Press {SET}.

should be good now.


Apr 24, 2009 | Panasonic KX-FPG376 Plain Paper Thermal...

2 Answers

Cannot go back to default greeting message

According to the Operating Instructions for this machine, chapter 7.1.1. says that by erasing your recorded message, the machine should be set to play the pre-recorded greeting message again. And I guess you can then go on and try to record a new message, hopefully it will be more successful this time. I don't have this machine myself, but I wish you good luck!

Jan 03, 2009 | Panasonic KX-FPG376 Plain Paper Thermal...

1 Answer

Problem with answering machine on Panasonic Model # KX-FPG376

i followed the advice posted & it worked fine after that. thanks.

Nov 22, 2008 | Panasonic KX-FPG376 Plain Paper Thermal...

Not finding what you are looking for?
Fax Machines Logo

Related Topics:

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fax Machines Experts


Level 3 Expert

1113 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers


Level 3 Expert

469 Answers

Are you a Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides