Question about Garden

1 Answer

I want to install a kill switch on my 1994 ford ute to prevent starting

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 7,482 Answers

Hi Kevin
The easy way is to put a normal off/on switch into the coil ground wire and hide the switch inside of the vehicle in the dash area only know by you.
Then you can shut off the ground of the coil when you don't want to drive it, preventing others from starting it because they do not know where the hidden switch is placed.
I used this method on my 89 Mustang and 94 Dodge Truck.
Bud

Posted on Oct 21, 2013

  • 1 more comment 
  • kevin L
    kevin L Oct 21, 2013

    thank you very much, i should have said that the engine is EFI and the coil doesn;t appear to be like the conventional coil So i am unsure which wire to use !

  • Curtis Sewell
    Curtis Sewell Oct 21, 2013

    I can only guide you on the older models...sorry.

  • Curtis Sewell
    Curtis Sewell Oct 21, 2013

    Try resubmitting your request

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Couirier/Mazda Bravo 1994 2.6 petrol 4x4 B2600 I need to buy new/used ECU (G618) replacement or upgrade for my 4x4 ute I want to know the compatible units i can use and best place to get one.


the ecu has to come out of the
same year and number as the engine and drive line
Ford Courier/Mazda Bravo 1994 2.6 petrol 4x4 B2600
source from
ebay
a 4x4 wrecker
an good auto electrican can referb your original
this is usa but might be a seller some where in australia

edit I added image of a G695
http://www.ebay.com/itm/OEM-91-92-93-MAZDA-B2600i-TRUCK-ENGINE-COMPUTER-CONTROL-MODULE-ECU-G618-18-881A-/1916530508691a07fc2d-2613-4d2f-a996-9a4d38ad626f.jpgford-couirier-mazda-bravo-1994-2-6#sln-36462275-ynwsor2g41t5qaon3uf1gyaf-5-2_2.jpgford-couirier-mazda-bravo-1994-2-6-ynwsor2g41t5qaon3uf1gyaf-5-3.jpg

Sep 11, 2016 | Ford Cars & Trucks

1 Answer

1994 Mazda ute how do I adjust clutch cable


you may have to be more specific as to the model mazda you have as all my information says that only canadian mazda utes had a cable clutch
All others run hydraulics.
If you have a problem with a cable clutch then I would be not adjusting it but replacing the stretched cable.

Feb 06, 2015 | Mazda Cars & Trucks

1 Answer

How do i remove a smartlock out of my 1994 ford xg ute


There might be a inertia switch in the engine bay try that

Jan 22, 2015 | Ford Cars & Trucks

1 Answer

Someone attempted to steal my doge neon 2002. Now the kill switch is preventing the car from starting. What do I do?


RE: Someone attempted to steal my doge neon 2002. Now the kill switch is preventing the car from starting. What do I do?Posted by Calliean... on Oct 18, 2014 ..


Disconect the Battery for 20 Minutes it will reset the computer

Oct 18, 2014 | 2002 Dodge Neon

1 Answer

Car starts, then dies shortley thereafter. Relay? bad plugs? already checked fuel pump. any advise? what's a "inurtia" (sp) switch?


It's probably not the inertia switch which kills the fuel pump totally. It's in the trunk and you reset it by pushing down the red button.
I'm rusty on that old car,but my Dad had one.GREAT CARS! Safe when wrecked,too!Ha,Ha!!!
A vacuum leak will kill a car after fast idling is over at start-up, but there is probably an electrical solenoid acting up( IATC solenoid?), in the air plenum or at the throttle plate..It's somewhere in that area,I'd say. don-ohio

Sep 10, 2011 | 1994 Ford Taurus

1 Answer

"99 ford tradesman ute longreach. Excessive fuel


cold start temperature sensor is my first suspect

Oct 31, 2010 | 1999 Ford Super Duty F 550

1 Answer

Falcon ute lights go dim at night and battery goes flat.


either your alternator is faulty or your battery is not holding charge
i would check the alternator and the battery and replace either or both

Jul 08, 2010 | Ford Futura Cars & Trucks

2 Answers

I HAVE A 1994 FORD EXPLORER-- I HAVE CHANGED THE ALTERNATOR AND REPLACED THE BATTERY--IT STARTED--A WEEK LATER IT WILL NOT START--WHAT COULD BE WRONG


Look into the neutral safety system. Quick test is to (foot on brake) turn key to start and move shifter through the N range. Is it centered? this switch sometimes goes out of adjustment and it's purpose is to prevent starting in gear...

Doc

Sep 16, 2009 | 1994 Ford Explorer Limited

1 Answer

Alarm activated when it wasn't engaged. Now car won't start runn


some alarms have kill switches, but most of them prevent the car from even starting. i would consider strongly getting the remote for the alarm or Completely disconnect the alarm module.

Aug 06, 2009 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
Garden Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

10897 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...