Question about Air Tools & Compressors

Open Question


Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Will 3.8cfm @90lb pressure air compressure 10 gallon 125psi work with impact wrench at average air consumption 8cfm

Air tools demand volumes of air; a 10 gallon is good for something like a finish nailer, or staple gun, or even a nail gun.
It will run the impact wrench, just not for very long, like 10 to 12 seconds if you're lucky.
Most compressors tell you what types of tools they are made for.
And impact gun is best matched with a 21 - 26 gallon compressor.

Nov 03, 2015 | Air Tools & Compressors

1 Answer

Why my air compressor Hundyai is not switching on?

The pressure switch turns on the power when it's low and shuts it off when the pressure has come up. There is a lever on the side of the switch that manually shuts the compressor off. Check both .

Sep 24, 2014 | Hyundai HPC6060 6-Gallon Air Compressor...

1 Answer

My air compressor is sometimes slow to start and it will throw out the breaker on the compressor when it runs it runs great. when it builds up air and shuts off it will not come back on when the pressure...

Two things to check... the wiring to the compressor may not be a heavy enough gauge to support the current draw...

The start capacitor on the motor may be going bad...


May 14, 2011 | Northern Industrial Tools Northern...

1 Answer

I have a central pneumatic aircompressor with a 21 gallon tank.It pumps up to 120psi then pops off down to 80psi and goes back to 120psi...back and forth... never stoping...could it be a bad pop-off valve?

I would first find out what pressure the compressor is supposed to shut off at. If it is supposed to shut off at lets say 110 then the pop off valve is doing its job you have to reset the pressure switch so it shuts off less than 120 pounds.

Mar 16, 2011 | Air Tools & Compressors

1 Answer

I have a chicago pnumatic home air compressor 3 hp.21 gallon tank worked great moved from one house to another compressor tipped over and now acts like first stage of ele. motor is not working have to have...

sounds like the unloader/check valve is stuck or damaged. This is the part that holds the pressure in the tank and allows the compressor to start up without being under pressure

Mar 26, 2010 | Air Tools & Compressors

1 Answer

Husky 25 gallon air compressor turns on and off Y6020-WK

Pressure switch setting is off. Readjust to Mfg. spec. (on @ 60/off @ 8o...)

Sep 03, 2009 | Air Tools & Compressors

1 Answer

Air leakage through pressure switch needle

1)Let your unit pump up.
2)Turn it off.
3)Find the supply line from the pump to the tank.
4)Remove the supply line from the pump head.
5a)If you hear air coming from the tank you have a bad check valve.
5b)If you do not hear air coming from the tank, you have a leaky
pressure switch.

Feb 02, 2009 | Campbell Hausfeld 26 - Gallon Air...

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1388 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

16181 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides