Question about Computers & Internet

2 Answers

Wireless installation I configured my belkin router with a password to access it. now I cannot access it. I get an error message with 192.168.2.1

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Expert
  • 94 Answers

The default address for this router is probably 192.168.2.1. There may be a label on the router with this address because if you "reset the router" to reconfigure everything; you will need to find the router with this default address to completely set it up again. Reset by pushing and holding the reset button a few seconds. The button is probably at the back of the device. Default User Name will probably need to be "admin" and default password is probably either "blank" or "admin" to access the setup menus. In the setup you will need to input wifi password, etc. Getting the user manual for this model router from the Belkin website may be helpful. If a secure connection is required and you are not experienced recommend hiring a pro.
Good luck.

Posted on Oct 20, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 57 Answers

Sorry but i didn't get it, Do you forget the Network Key of your wireless of you forget the login password for your belkin router?

Let me tell you both solutions.

1 If you forget the network key - then you can login to your belkin router and go to the wireless and you will get your network key there.

2 If you forget he login password of your belkin router so just look at the back side of router there must be a reset button which will reset your router and password to the factory date.

hope it will help you :)

Posted on Oct 20, 2013

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Templarius
  • 83 Answers

SOURCE: can't connect 2wire to internet

Before router put usual low cost switch....

Posted on May 26, 2008

ckdestroyer
  • 60 Answers

SOURCE: secure wireless belkin g router

What is the exact model number of your router?

To access the router's set up page, you have to get the default gateway you see under status of your local area conection then type it on the address bar. You will then get a username/password screen, enter ur password and it will redirect you to the set up page where you can enable wireless security.

Posted on Aug 26, 2008

  • 489 Answers

SOURCE: My router wont configure

Plug in the laptop to the router and the router to the modem. Power cycle the modem. Turn on power to the router. Copen a command prompt on the laptop and type 'ipconfig /all' and press Enter. Look for your IP address (should have been assigned by the router and should look like 192.168.1.x). Also look for the default gateway. It will probably be 192.168.1.1. If that is the case, you should be able to use your web browser to connect to the router to check its configuration and the WAN status by typing in the address 'http://192.168.1.1' (or whatever was displayed for the default gateway previously.

Posted on Apr 11, 2009

  • 69 Answers

SOURCE: Lenovo T61. Wireless access fails all the time.

then that means you dont have wifi at your house you can get it from sprint or at&t. you pay each month like 10 bucks and they give you a small rectangle wifi receiver and you can connect up to 6 laptops wirelessly

Posted on Sep 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belkin install cd download


You do not need an installation CD to configure this wireless router.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL.
http://192.168.2.1
The default PW = blank (just press Enter)
You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access.
Now configure the wireless card in your computer/laptop with the router's wireless settings.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

May 11, 2013 | Belkin (F5D7230-4) Router (587009)

3 Answers

I need to configure a N600 Belkin router. How?


Reset the Belkin router -
To reset the Belkin back to the default settings -
Press and hold the pinhole RESET button at the back of the router and then power for at least 15 secs. Then release the RESET button.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Mar 21, 2013 | Belkin Play N600 Wireless Dual Band Router...

1 Answer

Belkin router


Try resetting the Belkin.
To reset the Belkin back to the default settings -
Press and hold the pinhole RESET button at the back of the router and then power for at least 15 secs. Then release the RESET button.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Mar 15, 2013 | Computers & Internet

1 Answer

Lost password for belkin router


To reset the Belkin back to the default settings -
Press and hold the pinhole RESET button at the back of the router and then power for at least 15 secs. Then release the RESET button.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Dec 30, 2012 | Belkin Basic Wireless Router

1 Answer

Cd wont work in my computer


You can setup your Belkin without an installation CD.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Dec 29, 2012 | Belkin Surf N300 Wireless Router...

1 Answer

Got my password


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Nov 19, 2012 | Belkin Wireless-G Plus MIMO Router with...

1 Answer

Belkin router


The encryption (password) code is configured in the router's wireless settings.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Sep 11, 2012 | Belkin (F5D7230-4) Router (587009)

1 Answer

Add a password


The router's encryption (password) is configured in the router's wireless settings.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Sep 10, 2012 | Belkin Basic Wireless Router

1 Answer

I cant remember my Belkin password. I dont believe I changed it from when I purchased it though so it should be the standard password


Not quite clear as to your problem. Are you trying to access the web-based configuration page for the router (for which you need an administrator password)? Or are you trying to make a wireless connection to the Internet via the router (for which you need the wireless security key)?

Those are two separate passwords, and you may be able to retrieve them both. The administrator password would be stored in the computer that was used to configure the router. The security key should be in the computer which configured the router, as well as any computer which made a wireless connection to the router.

You may find it helpful to check the owner's manual. If you don't have that available, you can download a copy here:
http://en-us-support.belkin.com/app/product/list/q/routers/
Be sure to specify the correct router model.

If you can access the web-based configuration page for your router, you should be able to view (or reset) the wireless security key. (Check the owner's manual for your model.)

For many Belkin routers, the URL for that page is simply: http://router
novaweb_10.gif

Then select "Security", and following the onscreen guidance.
novaweb_11.gif


If you're not able access the router's configuration page, and the passwords are stored, you should still be able to retrieve them by installing some free software.

For the computer that configured the router, download and install this program:
RouterPassView by NirSoft
http://www.nirsoft.net/utils/router_password_recovery.html
http://www.softpedia.com/get/Network-Tools/Misc-Networking-Tools/RouterPassView.shtml

For a laptop that connected to the router, download and install this program:
WirelessKeyView
by NirSoft
http://www.nirsoft.net/utils/wireless_key.html

http://www.softpedia.com/get/Security/Decrypting-Decoding/WirelessKeyView.shtml

Feb 22, 2011 | Belkin (F5D7230-4) Router (587009)

2 Answers

Installation of belkin router failed


You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.15.1
or
http://192.168.2.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Clickon wireless settings enable wireless then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

May 08, 2010 | Belkin (F5D5231-4) Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...