Question about Boating

1 Answer

Lowrance x135- Unit will not switch on? - Boating

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 227 Answers

Check to see if you have power to unit if so pull plug the power plug off the back of unit to see if the prongs in socket is ok if all looks good sounds to me you got a bad key bad..repair shop or time for a new one

Posted on Dec 19, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
hydetech
  • 113 Answers

SOURCE: proper set up for lowrance sonar

Where do you use your boat?

There are so many variables it's hard to fit it all here, but there are some excellent tutorials on the Lowrance website. The most important thing is to pick the right frequency, for the depth of the water. (200khz for less than 70', and 50 khz for greater depths). Depending on how serious you are about fishing, there are a lot of extras that you may never use. The key is to figure out which features will help you the most and forget about the rest.

You may also get some help at this link: FixYa Service Directory

It's common for SONAR to lose contact with the bottom at high speeds. The better the transducer installation, the faster you can go. Turbulence and bubbles will cause the SONAR to drop out. Lowrance's transducer installation guide explains it very clearly.

Posted on Jan 08, 2009

  • 1 Answer

SOURCE: lowrance x135 not functioning properly

Had the same issue with another brand. Turned out the transducer cable was picking up noise from other cables (power, trolling mtr. etc). Try moving the transducer cable away from any other cables. I put the cable in a 1/4 " plastic housing up to the point where it was above deck and it stopped all the strange stuff. Not sure about the temp issue??

Posted on Jul 21, 2009

Adrian762
  • 425 Answers

SOURCE: Our lowrance x135 just quite working Its less than

Here is a manual for it. http://www.lowrance.com/upload/Lowrance/Documents/Manuals/x136df_0151-171_112003.pdf ,

Take it to a major marine outlet, they generally have access to experts who fix this type of equipment

Posted on Feb 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unit will show correct depth for a short time and then reset to 2.2 feet and stay at that reading for long periods of time!


I assume that when it resets to 2.2 feet that the readout is flashing. If so the it sounds like you have a bad transducer as the problem has been getting progressively worse.
The transducer needs to be replaced. Sounds like the sending crystal is fractured.

Aug 06, 2014 | Lowrance X135 Power Pro Sonar Without...

1 Answer

Lowrance X135 blows in-line fuse and won't power up? How to troubleshoot


First, follow the wire from the fuse to the unit. It may be pinched or cut somewhere between those two points. Seems simple, but this happens often. If the wires look ok, You could also try a fuse one size bigger. If it blows that fuse, then the problem is in the unit, and you will have to sent it out for repair.

Apr 10, 2014 | Lowrance Lms 520c 5" Screen Color External...

1 Answer

Lowrance fish no display


its history buddy screens out time for a new one

Apr 18, 2013 | Lowrance Boating

1 Answer

Lowrance x135


solid vertical lines on graph different widths...is this the transducer?

Jan 04, 2012 | Lowrance X135 Power Pro Sonar Without...

1 Answer

Lowrance x135 wont power on?


could be a bad connection to power

Jan 09, 2011 | Lowrance Boating

1 Answer

I have three cords comming out of my power cord witch of the three do i use


Usually one is the data cable that fits to the back of the display unit. The other two are red and black power cables. The red goes to the positive side of the battery and the black to the negative. That's basically it.

Mar 30, 2010 | Lowrance X135 Power Pro Sonar Without...

1 Answer

Our lowrance x135 just quite working Its less than two years old, where do we send it?


Here is a manual for it. http://www.lowrance.com/upload/Lowrance/Documents/Manuals/x136df_0151-171_112003.pdf ,

Take it to a major marine outlet, they generally have access to experts who fix this type of equipment

Feb 05, 2010 | Lowrance Boating

2 Answers

Lowrance x135 not functioning properly


Had the same issue with another brand. Turned out the transducer cable was picking up noise from other cables (power, trolling mtr. etc). Try moving the transducer cable away from any other cables. I put the cable in a 1/4 " plastic housing up to the point where it was above deck and it stopped all the strange stuff. Not sure about the temp issue??

Mar 29, 2009 | Lowrance X135 Power Pro Sonar Without...

1 Answer

Proper set up for lowrance sonar


Where do you use your boat?

There are so many variables it's hard to fit it all here, but there are some excellent tutorials on the Lowrance website. The most important thing is to pick the right frequency, for the depth of the water. (200khz for less than 70', and 50 khz for greater depths). Depending on how serious you are about fishing, there are a lot of extras that you may never use. The key is to figure out which features will help you the most and forget about the rest.

You may also get some help at this link: FixYa Service Directory

It's common for SONAR to lose contact with the bottom at high speeds. The better the transducer installation, the faster you can go. Turbulence and bubbles will cause the SONAR to drop out. Lowrance's transducer installation guide explains it very clearly.

Jan 03, 2009 | Boating

Not finding what you are looking for?
Boating Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Boating Experts

Steve
Steve

Level 3 Expert

693 Answers

ray gallant

Level 3 Expert

44304 Answers

Fabrice Wolters

Level 2 Expert

265 Answers

Are you a Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...