Question about Sharp LM12S49

1 Answer

Sharp LM12S49. I have a problem with white screen. Can anyone help me how to solve it.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 36 Answers

You are asking about the screen Sharp LM12S49, what is the screen used in. laptop or similar unit, the electronics driving the screen probably had an electronic component going bad within one of the printed circuit boards, and needs to be tested to determine if the board can be refurbished, or damaged to the point of needing replaced. the screen showing white means that the screen is working but not getting the video signals that it needs to show a picture on it. please give more details of the model of the unit that this screen is used in.

Posted on Oct 20, 2013

Testimonial: "Dear Rodger thank you for your reply, The screen is used in a homag edgebanding machine. The only temporary solution that i found is to use an external crt display since it has a secondary vga output."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Anyone knows where white spots on the screen along the bottom of the tv screen can be coming from


The spots are part of the transmitted signal. Normally they are masked so you don't see them.

Aug 16, 2016 | Sharp LC 70SQ15U 70 inch Aquos 1080p

1 Answer

Hi - got a Sharp Aquos LC32AD5E, whilst watching the screen suddenly went white then black, and now stays black. Sound is still there - but absolutely nothing on the screen. I have checked all the...


you can try in a dark room turning it on and see if you can see just a hint of light coming on the screen

its most likley going into a shut down
it could be a power supply or a inverter board issue
or even a lcd display driver board

you will need to find a good servicer in your area to help you with this
and you might try calling sharp and asking if they can offer some assistance with this concidering its age ect

Oct 22, 2009 | Sharp LC32AD5E 32 in. LCD TV

1 Answer

Toshiba 50H13 blurry picture with white line on right side


replace all the surface mounted electrolytic capacitors on the hyper module. also called the scan converter module. this is a common trouble. what a nasty job. good luck.

Jun 23, 2009 | Toshiba 50H13 50" Rear Projection...

2 Answers

SCREEN BLINKING L2 ON SHARP AR-5316 E


L2 mirror sistem problem.Check mirror motor and mirror home position sensor.

Jun 04, 2009 | Sharp AR-5320 Black and White Copier

3 Answers

Half my screen is soild white the other half is perfect


one of the ribbon cables connecting lcd control board an lcd panel is not sitting properly or connector is not locked.

May 09, 2009 | Sharp LC52D65U 52 in. LCD TV

1 Answer

I have Sharp AR-407 Grayscale Copier and i got the problems in it . it showing me the E7-11 code . i dont know how to solve this problem . can any one help me to solve it thnx


this is ccd white correction , clean the opitus really good and under the plat on the right side make sute there is no condisation or dirt on white plate

Jan 14, 2009 | Sharp AR-407 Copier

1 Answer

Sharp aquos hdtv has sound but shows a white screen


yes and no. That particular tv you have is done for, but if you just purchased it 6 months ago, you are still within you 1 year warranty with sharp. they will ask you to take it to a authorized service center and you need to follow through with the process. about a week or 2 will pass and the service center will deem the unit unrepairable and sharp will replace it if they cant solve the problem. give em call..good luck 2u

Dec 24, 2008 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

Not finding what you are looking for?
Sharp LM12S49 Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Mark Dewar

Level 2 Expert

107 Answers

Are you a Sharp Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...