Question about Medical

Open Question

On the GE mac 5500 ekg prints & saves but when trying to print the same stored ekg it prints blank

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 71 Answers

SOURCE: Marquette MAC 6 EKG machine prints extra pages

You are using the worng paper. Cross refrence the paper you are using with the correct number.

Posted on Jun 03, 2009

  • 16 Answers

SOURCE: Won't give print out on Automatic but will give on manual

Turn off the machine & then turn on after 10 seconds. than press ALT 1 1 0 STOP in a sequence. That will solve your problem for printing in AUTOMATIC Mode

Posted on Jul 10, 2009

  • 1 Answer

SOURCE: lower half or EKG would not print properly

You should purchase a printer kit. This is a common problem I have encoutntered on this machine and this machine is identical to the Seca CT6I. I have ordered the printer kit from Seca in the UK, the part number is 9740490024 at a cost of £70. It is a straightforward repair.

Posted on Sep 11, 2009

  • 71 Answers

SOURCE: GE MAC1000ekg not printing clearly

The heat on the print head can fade over time giving you a poor print. also the feed roller can wear and give poor pressure to the print head. thw way to diagnose it is to put a peice of electrical tape on the print roller and print an ekg. if it prints well in the area where the tape was, it is the print roller. if there is no change it is the print head.
wats@mesasales.com. www.overstockme.com. Jeff Watson

Posted on Jan 01, 2010

  • 157 Answers

SOURCE: We have a GE MAC1200 EKG that will only print

The battery is weak. Disconnect the AC, battery,& then replace the memory battery. Reconnect the power battery & AC. Next is a pain in the rear, reprogram the unit; date, ID, setup, ect.

Posted on May 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i get in system setup for a mac 5500


If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Mar 13, 2016 | Ohmeda GE Healthcare MAC 5500 EKG

1 Answer

How to load paper


How to load paper - Fixya

www.fixya.com > Forum > EKG/ECG Machines
39 mins ago - How to load paper - EKG/ECG Machines question. ... Machines. Open Question ... Aug 30, 2012 ' Schiller Cardiovit At 2 Light Ecg Machine.

Loading paper into the MAC 1200 ecg machine - Fixya

www.fixya.com/.../t4590309-loading_paper_into_mac_1200_ecg_mach...
Apr 19, 2010 - loading paper into the MAC 1200 ecg machine how to load the paperinto the machine? ... Ge Medical Systems Ge Marquette Mac 1200 question.

Contec ECG Monitor & pulse oximeter Ekg printed sheet ...

www.hcuck.com/search/p1207318-contec_ecg.../ekg_printed_sheet
Question about Ge Medical Systems EKG/ECG Machines ... Open the . ... ...ekg-manual The paper is is backwards, there are 4 ways to load paper BUT only 1 ...

Electrocardiograph (EKG / ECG) Questions and Answers


Dec 21, 2015 | Medical

1 Answer

How can I print out a stored ECG on the MAC 1200? After I choose the ECG, select 'Print' and press 'Enter' I get taken back to the ECG screen. Please Help!


Hi,

- Go to the storage program by pressing "Shift" + "Store/retrieve" simultaneously.
- using the down arrow, move the cursor to the space where your ECG's are listed and underline the ECG you wish to re-print.
- Once the ECG is underlined, press "Shift" + "down arrow" simultaneously. Two little cursors will state that the ECG is selected.
- Press "Enter". The cursor will come back on top of the screen, on "Print".
- Press "Enter" again. The machine will start to print.

I hope this helps !

Fel

Nov 09, 2011 | Ge Medical Systems Ge Marquette Mac 1200...

2 Answers

Our MAC 1200 ekg machine prints out 1 empty sheet prior to printing the actual ekg. Is there a way to eliminate that first page? It wastes a ton of paper. thanks, Dan


hi,


1.Press the setup Button
2.Select operating mode and press enter.
3. Repatedly perss the down arrow until it reaches to the "START AT QUEUE MARK" and perss enter. Then select NO and press enter ( if it is selected Yes then before each recording the recorder advance the paper to the beginning of the next page)
4. Press the Start button to exit the setup.
From the next EKG it will print from the first page.
ok

Aug 09, 2011 | Ge Medical Systems Ge Marquette Mac 1200...

2 Answers

I have EKG machine GE MAC 1200. I change the paper now it is not printing with new paper. What should I do?


Our EKG machines at work have specific paper that will only work with them, are you using the same type as before? Also, it is possible to put the paper in upside down and it will not print on that side. Have you tried to turn the paper around? Good luck

Apr 26, 2011 | GE Medical

1 Answer

We have a GE MAC1200 EKG that will only print once. The unit gets stuck (will not print - just continues to analyze) when a 2nd ekg is attempted to be printed. If the the unit is unplugged, then the unit...


The battery is weak. Disconnect the AC, battery,& then replace the memory battery. Reconnect the power battery & AC. Next is a pain in the rear, reprogram the unit; date, ID, setup, ect.

Apr 19, 2010 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

GE MAC1000ekg not printing clearly . My EKG machine is recording the EKG well but when I print it comes out very faded.


The heat on the print head can fade over time giving you a poor print. also the feed roller can wear and give poor pressure to the print head. thw way to diagnose it is to put a peice of electrical tape on the print roller and print an ekg. if it prints well in the area where the tape was, it is the print roller. if there is no change it is the print head.
wats@mesasales.com. www.overstockme.com. Jeff Watson

Nov 17, 2009 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

The ECG is printing very lightly . Do I need to change the roller?


try a new pad of paper if that didnt work then you need a new print head..

Nov 16, 2009 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

The paper is not printing out all the way the top prints but the bottom is blank, does it have a printer cartridge?


the bottom off the print roller might be misaligned or worn. it could also be part of the print head is out. put electrical tape on the part that is not printing correctly and see if that improves the printing. If it does, it is the print roller. If it does not, it is the print head. Please let me know if you need any other assistance.
wats@mesasales.com. www.overstockme.com. Jeff Watson

Nov 03, 2009 | Ge Medical Systems Ge Healthcare Mac 1200...

1 Answer

Marquette MAC 6 EKG machine prints extra pages before and after report. Any suggestions?


You are using the worng paper. Cross refrence the paper you are using with the correct number.

Mar 19, 2009 | Ge Medical Systems Ge Marquette Mac 1200...

Not finding what you are looking for?
Medical Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Medical Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Brad Brown

Level 3 Expert

15557 Answers

masud
masud

Level 3 Expert

572 Answers

Are you a Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...