Question about Konica Minolta bizhub C450 Scanner
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First check the alignment front and rear of the finisher, check the finisher exit guide rollers if the paper is exiting properly, open both rear and the front cover and check the lower gears attach is the up/down drive belt. that lower gear one might be broken by the pin slot.
Posted on Jul 09, 2009
tis error means abnormal tonder density in the balck image unit take the blacke image unit out and shake it while holding it level and put it back in the machine to reset the error code leave the machine on and open then close the front door
Posted on Nov 16, 2009
SOURCE: How do I clear error
As the Installation Manual and Imaging Unit replacement instructions mention, pay close attention to shaking the Imaging unit properly to level the toner and also keeping the Imaging unit level when installing it into the machine
Posted on Feb 16, 2011
Tips for a great answer:
Aug 18, 2014 | Konica Minolta Bizhub c203 Copier
May 14, 2013 | Konica Minolta Bizhub C 353, Bizhub...
May 07, 2013 | Konica Minolta bizhub Office Equipment &...
May 06, 2013 | Konica Minolta bizhub C450P Laser Printer
Nov 12, 2009 | Konica Minolta bizhub C250 All-In-One...
Sep 05, 2013 | Konica Minolta bizhub C450 Scanner
397 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 2 Expert
Step 2: Please assign your manual to a product: