Question about Washing Machines

Open Question

DWD-M1031 washing maching door stuck how to open the door pls help me

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

barkencoa
  • 3463 Answers

SOURCE: Door Stuck after wash completed

You will have remove top cover, and release door latch from inside the front, with a screw driver pushing against the latch to open door.
It does mean that you probably have a faulty door lock, or broken door handle.
Please rate my fixya solution.
Thanks

Posted on Feb 01, 2009

  • 1294 Answers

SOURCE: my kenmore washing maching door is not opening

Hold in "end of cycle" for 3 seconds. Or if you have a pic of a "key" on one of the buttons, hold that in till the lock signal goes off.

Posted on Mar 13, 2009

  • 1525 Answers

SOURCE: Hotpoint First Edition washing maching won't spin

hello any spin problems could be down to the module circuit board

shaun

Posted on Aug 02, 2009

  • 82 Answers

SOURCE: Model Thor1050 washing mach door stuck. How do I open?

Try bumping it. If that doesn't work, unplug the machine and then plug it back in.

Posted on Mar 14, 2010

  • 3 Answers

SOURCE: My washing machine door wont open

Sorry for VERY late solution. I have an LG front loader machine and it has just broken. While surfing the internet, I found your blog. LG front loaders have a weak door handle, that breaks after a few years of operation. All the LG models seem to be the same. Replacement door handles are relatively inexpensive and readily available.To open your STUCK door, I would use a thin butter knife....slide the butter knife between the door and the frame of the machine until you hit the metal latch. Push the latch towards the centre of the machine and open the door.In the interim until you can get it fixed, this workaround method will work, enabling you to continue washing.Hopefully LG will make future models door handles out of cast, or something stronger!

Posted on Jan 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a daewoo washing machine dwd-g20dl showing error code LE


LE Washing machine door opening error
The washing machine or washer dryer door has been detected as open or unlocked.
·Close the door!
·Check the door lock switch
·Check the door latch
·Check PCB

Jul 09, 2014 | Daewoo Washing Machines

1 Answer

E9 message and machine stops


Jayshree, E9 error, pressure sensor error/water sensor error.
Replace water level sensor. The error display disappears if power button is turned off and on.This is what the service manual states.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Daewoo DWD M103 Service Manual Page 15 of 16
Daewoo CV701PC Service Manual Page 26 of 52
Daewoo Washing Machine Error Fault Codes
Washing Machine pressure switch

Apr 20, 2014 | Daewoo DWD M1031

1 Answer

LE error showing


you need to replace your door lock

Feb 10, 2014 | Daewoo DWD M1031

1 Answer

No power to machine


check the transformer on the board

Feb 07, 2014 | Daewoo DWD M1031

1 Answer

Troubleshooting


Best bet would be to unplug the machine, leave it for 30 seconds, then try plugging it back in.

Oct 19, 2013 | Daewoo DWD M1031

1 Answer

Wmf540 hotpoint washing machine


This video will show you how to open your Wmf540 hotpoint washing machine door that is stuck shut
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 08, 2013 | Hotpoint Washing Machines

2 Answers

How to change the switch door lock


What is the model number of your unit?

Nov 02, 2012 | Daewoo DWD M1031

1 Answer

WASHER DOOR STUCK


Not all that uncommon on some front loaders. Yes, it is trying to lock and unlock. You can try two different things that might work. 1) Unplug the unit and let it set for 5 minutes and see if it then unlocks itself. Some units have a bi-metal timing that can take from 2-4 min. to release after the spin stops. 2) Wake up unit by pressing start or any button that starts the lock clicking. Have your hands on the door with some gentle pressure because if it unlocks you can pull the door open. Sometimes these things get mixed up and lock, unlock, and lock again. Once you get it open it usually clears up and does not happen very often.

May 17, 2012 | Daewoo DWD-WD3011WW 4.0 cu. ft. Capacity...

1 Answer

Model Thor1050 washing mach door stuck. How do I open?


Try bumping it. If that doesn't work, unplug the machine and then plug it back in.

Mar 14, 2010 | Washing Machines

1 Answer

Hotpoint First Edition washing maching won't spin


hello any spin problems could be down to the module circuit board

shaun

Aug 02, 2009 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...