My computer have no active mixer device....

you must turn one of ,one driver will be for Ethernet the other for wifi.right hand side connect icon right click go to network and sharing ,left hand side up top change adapter choose the one you want.as the the yellow marks its telling those drivers are missing.you need either to download them or look for your driver or motherboard disc as the drivers will be on there.

what is the make and model of your computer?

this is a gateway site for drivers see if that helps...
http://support.gateway.com/support/drivers/search.asp?ref=step&st=browse&platform=10022&model=11334&os=10406&type=10100
as for the video i think that one has this one for a controller...
http://www.nvidia.com/Download/index.aspx? lang=en-us

I lost my sound device after I formatted windows XP professional SP2

http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1596141&rpn=PSAD6U&modelFilter=A135-S2276&selCategory=3&selFamily=1073768663

Please be sure to rate this solution

Hi
This is the software issue. Need to install the appropriate software to reslove this issue.
1.Ethernet controler - Need to install the chipset driver and the Lan driver
2.Pci bus device - Chipset driver
3. sm bus controller - After installation of the Chipset driver - Right click on the sm bus controller and update the driver - select install from specific location - i will chose the location- Select the model and hardware type as thermal sensor
next - follow the instruction.
4. video controller - Need to install the VGA or Display driver
5. video controller (vga compatiable) - Need to install the VGA or Display driver

With regards

[email protected]

you would need to get all the drivers for your laptop from the IBM website and install all of them. If you cant find them or need further help please post back and let me know.

i need drivers for my satellite L310, PLS HELP ME CNF7051 ETHERNET CONTROLLER MASS STORAGE CONTROLLER MODEM DEVICE ON HIGH DEFINITION AUDIO BUS PCI DEVICE SM BUS CONTROLLER VIDEO CONTOLLER VIDEO CONTROLLER(VGA) UNKNOWN DEVICE

Go to "Device Manager" and look if any yellow or red alerts are being displayed next to any devices. To access the "Device Manager" go to the 'Control Panel", "Administrative Tools", "Computer Management" and select "Device Manager" located in the left side column.
If there is an alert, double click on that device to determine the problem, i.e.… device not configured, cannot start this device, etc…
It sounds like all your software drivers got blown away or can’t load. If that’s the case, try running diagnostics. Press and hold the <Fn> key while powering the system on. This will initiate a diagnostic routine to check your hardware.


Your responses are intended to improve the level of service provided. Please show your appreciation by rating your experience.
Thank You.

plz visit the manufacture website and download the drivers