Right Fax blurry - Office Equipment & Supplies

From my recollection the drum is a part of the toner cartridge in this printer so having changed that 3 times, it would not be at fault. I believe your machine has a worn/torn fixing film which is in the fuser assembly. That is the heated area where the paper goes through before exiting the printer. There is no quick fix other than replacement.

You have installed a defective toner cart. Many bad ones out there

Try making a copy to see if it is the same. That will eleminate or focus in on if it's your end or theirs. If it looks small and blurry then check/clean the feed rollers in the original/scan section with warm soapy water.

Slight possibility that your sending in Photo Mode, most likely the machine was damaged during shipping and the CCD unit or scanner is out of alignment. Just make a copy....if it comes out blurry then it is the scanner. I would return it for another machine. If the copy comes out nice and clear then there is nothing wrong with the scanner.

this is a BAD CCD problem thousands are facing dont worry Canon will repair it free of charge even if u are out of warranty and not on list , just call or contact CANON in phillipines see this PLS RATE ME FIXYA for help

http://support-asia.canon-asia.com/index.jsp?fuseaction=support&prod_type=image-phenomena_notice

contact info in philipines

Canon Marketing (Philippines) Inc
Marvin Plaza Building
2153 Don Chino Roces Ave
Makati City, Metro Manila
Philippines
Tel : +632 884 9000
Fax : +632 812 0067
Email : [email protected]


For: Ophthalmic Equipment

I.O.S. Marketing Corporation
647 P. Paterno Street,
Quiapo, Manila 1001,
Philippines
Tel : +02 733 5443
Fax : +02 733 3767
Email : [email protected]

If you are running XP, I would open them with the picture and fax viewer and print them that way.  I believe work downsizes the image quality in order to save on the big size of the document.

Not good! It sounds like you have a bad scanner assembly. Make a copy of something and you probably will see the same result.

Received fax is unreadable or blurry
Please go through the checklist below to see if the suggested action(s) can resolve the issue.

* Make sure the copy function is working well.
* Print a Clean nozzle page from the Maintenance menu. If the printout has unexpected white or color horizontal streaks or missing portions, print the Clean nozzle page again. If you are still experiencing streaks or mission portions, you may need to replace your cartridge(s).
* The cartridges may need to be aligned.
* You may need to ask the sender to increase their fax quality.

Sent fax is unreadable or blurry.

1. If the receiving party indicates that the fax output is unreadable or blurry, you may want to try increasing the fax quality.
2. Check the scanner glass for excess amounts of smudges and/or fingerprints. If the scanner glass needs cleaning, moisten a clean, lint-free cloth and gently wipe the scanner glass. Make sure the scanner glass is dry before scanning the next document.

your machine most likely has toner spills in it.
if you send faxes face side down follow these instructions ;
1- take out toner
2- look for thin glass strip on bottom inside the machine
3-wipe clean

if you make copies side up then do the same except look for glass strip on the upper side of machine

Are you using genuine Brother supplies? Generic supplies are the main reason for print quality issues. Have you ever changed thr drum unit ? Expensive! You can buy a new machine and get a new drum and toner for a little bit more.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de