Question about Akai Ewi4000s Electronic Wind Instrument

Open Question

I need a CABLE CLUTCH for an AKAI EWI 4000s electronic wind instrument. It is the small clear plastic clip that snsps onto the bottom of the instrument to support the MIDI and AUDIO cable, so they don't get pulled out of the instrument. Please contact at: jimyoung562@aol.com I'm in the los angeles/ OC area

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Detuning of Akai EWI 4000s

Are you shure that you aren't touching the bend up plate with your right thumb? This isn't easy detected by sax players which are used to have a thumb rest at exactly the same spot where the bend up plate is. You might switch it off (see manual). With the bend up plate on you should aways use a tight strap which helps a bit to not touch the bend up plate accidentally. I'm still struggling with this occasionally.

Posted on Dec 08, 2008

drifterK
  • 4924 Answers

SOURCE: I installed the Vyzex program

I think it is a compatibility issue of th program ...with the new operation system that were developed in the past 2 years..try to get on the program's site ..and see what they have in matter of updates and about the compatibility with the operation system you use.. If there is non ...than if you know it worked on windows XP...just scarify a partition and install windows xp on it ..and go for a dual boot ..when ever you need to use it ..boot into xp...and in rest use the computer normally

Posted on Aug 30, 2010

  • 1137 Answers

SOURCE: Hi, I am writing from Holland. I need Akai EWI

Here is one link:http://www.patchmanmusic.com/ Although they do not ship hardware outside the U.S. there is lots of good info. This is a good store and they ship Internationally:http://www.sweetwater.com/c966--Wind_Controllers Contact them to see if they have the cable in stock.

Posted on Nov 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ewi 4000s cutting off


My EWI 4000s started to play by its self making a loud low note and then it stop and now it won't play at all. I Reset to Factory Preset but that didn't help. What do I need to do to get it to play again?

Feb 09, 2014 | Akai Ewi4000s Electronic Wind Instrument

1 Answer

Akai ewi 4000s neck strap mount


1 Un screw all the screw on black panel, but must remember where each on goes, but Be careful not the two screws in side mouth pice which holding the pitch bend unit. 2. open the battery cover remove all the battery 3. Remove the 1/4 earphone nut, and all screws on the silver metal case. (Under the black plastic ), you don't need to remove any screws from the "key" side 4. Use something to pull the battery Cartridge sideway out from Main attachments, but not all the way out from the ewi case, because you can't, the plastic case structure will be in the way, 5. Use some flat pice metal like dinning knife insert in to between black and sliver metal to separate the two parts, start from the mouth pice end, once you open wide enough the battery cartridge can be remove from the case out. Now you can open the Ewi 4000s and see the two HX nuts that holds the strap mount, put some Nail polish on it before you tie them up.....Warning.. You must pull the battery cartage sideway out from its electric plugging mount before you are trying to separate the plastic and silver housing otherwise you will damage the circuit board. That was What I did to mine. Good luck and may God provide you wisdom for this.

Apr 22, 2013 | Akai Ewi4000s Electronic Wind Instrument

1 Answer

Ewi and vocoder setup


hi, i have a YAMAHA WX5, and want to know if it's to use a Vocoder?
Mike Phillips is the same, or if it only works with the EWI 4000s?
and as a connection is made?
thank you!

Feb 04, 2013 | Akai Ewi4000s Electronic Wind Instrument

1 Answer

Hi, I am writing from Holland. I need Akai EWI


Here is one link:http://www.patchmanmusic.com/ Although they do not ship hardware outside the U.S. there is lots of good info. This is a good store and they ship Internationally:http://www.sweetwater.com/c966--Wind_Controllers Contact them to see if they have the cable in stock.

Nov 22, 2010 | Akai Ewi4000s Electronic Wind Instrument

1 Answer

Program change on the akai 4000s


Please try to wet your fingers a little bit.
When your fingers are dry the ewi would not react properly.

Jun 15, 2009 | Akai Ewi4000s Electronic Wind Instrument

3 Answers

My akai ewi 4000s kind of froze


Please try to reset the ewi. You can do this like this: Shut down ewi. Press down the four little white buttons Level, FX, Setup and Trans. Keep them pressed while starting up the ewi.
This is a factory reset.

I hope this works for you.

Apr 03, 2009 | Akai Ewi4000s Electronic Wind Instrument

1 Answer

EWI won't respond to comands


I've got the solution.
Turn the EWI off.
Press the LEVEL, FX, SETUP and TRANS buttons all together.
Turn on the EWI.
This is a Reset to Factory Preset.
Greetings Fred Roubos.

Dec 13, 2008 | Akai Ewi4000s Electronic Wind Instrument

1 Answer

IMac not detecting EWI4000s via midi-usb adapter


My Imac does not find the midi ports form my Ewi 4000S. When I try to install midi ports ( just one choice possible) it does not work. What can I do ?

Nov 09, 2008 | Akai Ewi4000s Electronic Wind Instrument

1 Answer

Detuning of Akai EWI 4000s


Are you shure that you aren't touching the bend up plate with your right thumb? This isn't easy detected by sax players which are used to have a thumb rest at exactly the same spot where the bend up plate is. You might switch it off (see manual). With the bend up plate on you should aways use a tight strap which helps a bit to not touch the bend up plate accidentally. I'm still struggling with this occasionally.

Oct 31, 2008 | Akai Ewi4000s Electronic Wind Instrument

Not finding what you are looking for?
Akai Ewi4000s Electronic Wind Instrument Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Music Experts

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

ray gallant

Level 3 Expert

42778 Answers

Are you an Akai Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...