Question about JBL Music

1 Answer

I Bought the Denon Mc2000 Dj Controller, The Place Where i dj has its speakers coming with 2 RCA cables to plug in plus I have to bring one of my Amplified speakers(JBL EON 15'')... I have tried al connections, even bough extra special wires/plugs but when i connect my JBL I cant hear the voice of the main singer, only the base works... is there a reason why? i tried to setup many different ways in the sound setup of VDJ but none works. When it does i get no audio in headphones or if i change i get no audio in speaker, Sometimes i even get the crossfade not work... I don't know if its the Mac or the controller.. I cant seem to figure out.. Tried many things... One thing that i can think of is that my Mac is not equipped with 4 channels, only 2, Can that be it? Help please! tanks...

Posted by on

  • Joel
    Joel Oct 18, 2013

    not its in the controller's master output



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

You are getting reverse polarity, meaning the speakers on one is the opposite as the other, black>red red>black, thus only getting vocals or music.

If you need further help, I’m available over the phone at

Posted on Nov 22, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Good Morning All. I am a mobile DJ currently

Just a guess - You may have an active component in the amplifier which is going bad ( i.e. transistor, chip ). Best to take it to a service depot to be checked. It is also possible since it is often transported that an internal cable assembly is loose.

Oct 24, 2013 | Music

1 Answer

How to connect denon sc2000 to external speakers

As far as I know you can't. You'd have to connect it to a mixer or USB device and use the MAIN OUT (or equivalent) on either of those to connect to external speakers. The denon sc2000 isn't meant to be something you'd use to listen, more to route and control.

Apr 29, 2012 | Denon DN-SC2000 MIDI CONTROLLER DJ MIXER

1 Answer

Only half the volume on the left channel of the mixer. Why? :(

Does the left meter do the same thing? If the meter matches the right one, I would suspect the volume potentiometer on the powered speaker. Try exercising the volume knob. There might be some oxidizing on the potentiometer.

Oct 25, 2017 | Allen & Heath Xone-22 2 Channel Dj Mixer

1 Answer

My jog wheel on denon dn s1000 is messsing up will not work properly

The encoder probably has dirt or dust in the pickup. Remove the wheel and clean the sensor area.

Aug 05, 2011 | Denon DN S1000 Scratch DJ Table Top DJ CD...

1 Answer

I bought American DJ discolights with T20f control. I do have American Audio mixer and cd player CDI 300. 2 powered Mackie 450 speakers. How can I connect the stuff?

I can only give you some ground rules to follow: Connect ALL of the audio equipment to a single receptacle or power conditioner. This may mean running an extension cord back from where the speakers plug in to the mixer. Use BALANCED lines, either XLR or TRS to connect the speakers to the mixer. Power the lights separately. To give anymore suggestions would require a diagram of how your venue is laid out and the location of power, etc.

May 10, 2011 | American DJ T20f Chase Control Pack W/foot...

1 Answer

The play button on my denon DN s 1000 has fallen of and i have lost it, where would i get a replacement?

Most of these buttons are special and can only be obtained through the origianl manufacturer. You can search and might get lucky... it is unlikely you will find one with the right legend on it... but at least you would have the button.

May 02, 2011 | Denon DN S1000 Scratch DJ Table Top DJ CD...

3 Answers

Bought a used Mackie TH-15A. When powered up there is no all.

The internal amp is in need of repair. Are there any other symptoms or signs?

Feb 08, 2011 | Mackie TH-15A Active DJ Powered THUMP...

Not finding what you are looking for?
Music Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top JBL Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

William Covington

Level 1 Expert

16 Answers

Richard Enyeart
Richard Enyeart

Level 2 Expert

64 Answers

Are you a JBL Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides