Question about Stihl Hl75 Hl75k Hedge Trim Owners Instruction Manual

1 Answer

REPLACING THE COIL ON MY STIHL HL75K, CAN SEE WHERE THE BLACK CABLE CONNECTS, BUT WHERE DOES THE BLUE ONE GO?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

I gather the black wire is the plug wire you are talking about? the other wire would go to cut off switch

Posted on Oct 19, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vibration coming from cutting blade through the machine Stihl hl75k


Do you have bent blades.? Try removing the 'driveshaft' and adding a coating of grease, the shafts can become dry within a plastic liner and start to vibrate

Apr 21, 2014 | Stihl Garden

1 Answer

Where go the ground cable in the stihl bg 72


it connects to the metal body via a small lug spade type connector
usualy this ground wire is used to by the switch to turn it off

Apr 19, 2014 | Stihl Blower Bg72 Hand Exhaust Muffler...

1 Answer

Can't get a spark on Stihl 020 chainsaw. Tried another coil and switch module but still no spark


It is possible your flywheel has lost it's magnet strength, if you noticed it turn a blue. Can take off flywheel and replace with a good one. Or you can play with the gap on the magneto/coil, and insert a piece of paper between the coil and the flywheel magnets, to set for air gap.

Sep 09, 2013 | Stihl Handle Chainsaw 020 Avp

1 Answer

Replacing Pool pump motor


Which control panel?
White can be Com, and Black Lo, and Red/Blue Hi
But this is guessing without knowing control panel wiring.

For example T106 timer. Wires can be any color.
http://waterheatertimer.org/images/T-106-control-208-277V-4-40.jpg
High connects to terminal 4
Low connects to terminal 1
Com connects to terminal A

Apr 16, 2013 | Pool & Spa

1 Answer

I am replacing a programmable timer switch that controls exterior garage lights. This switch is in the same box as a ac switch that turns on the lights inside the garge. There are 3 rolmex wires inside the...


Project is not clear.
Are you replacing the timer with a switch?
I have complete files on timers, so if you are replacing the old timer with a new timer, then add a comment and say which timer you are installing.
http://waterheatertimer.org/ST01C-program.html

You have 3 cables. Assuming 120Volts.
Each cable has 1 black and 1 white and 1 ground.
White wires are twisted together and pushed to back of box.
Ground wires are twisted together and pushed to back of box.
Black wires are next:

(A) Cable A:
One of the three cables will have a black wire that connects to both the switch and to the timer.
So look for the black wire that connects to both switch and to timer.
This is the hot wire from breaker box. Connect this black wire to both switches including new switch.

(B) Cable B: One cable goes to garage lights. Black wire going to garage lights connects to on-off switch.
So the garage light switch has 2 black wires: 1 black wire from cable A, and 1 black wire from cable B going to light.

(C) Cable C: One cable goes to outdoor lights. Black wire going to outdoor lights connects to new on-off switch.
So the outdoor light switch has 2 black wires: 1 black wire from cable A, and 1 black wire from cable B going to light.

Jun 27, 2011 | Hardware & Accessories

1 Answer

Wiring of the 2-5-10-15 timer to a jucuzee bath tub it has three wires black blue green. Thanks. Terry.


First thing to consider is size of Load.
Leviton countdown-timer Load rating is 1800 Watt, 120Volt.
Look inside Jacuzzi at rating plate on motor.
Rating plate on motor should give Volts, Watts and Amps.
Formula Volts x Amps = Watts.
Sometimes motor shows VA which is Watts
Is Jacuzzi on 240Volt breaker or 120V breaker?
Leviton countdown timer is not for 240V load.

A) If 120Volt electric Load checks out, here's how to wire timer if 1 cable enter box.
Timer-black-wire connects to jacuzzi-black
Timer-white-wire connects to ground.
Timer-green connects to ground.
Timer-red connects to jacuzzi-blue.

B) Here's how to wire timer if 2 cables enter box.
120Volt cable coming from breaker box has black, white and bare copper wire.
Timer-black-wire connects to black-wire-from-breaker
Timer-white-wire connects to white-wire-from-breaker-box.
Timer-green and jacuzzi-ground connect to ground

Timer-red-wire connects to jacuzzi-black-wire.

Jacuzzi-blue-wire connects to white.
I am puzzled why this wire is blue if circuit is 120Volt.

Nov 26, 2010 | Leviton Timer Switch 2-5-10-15 Minutes, 4...

1 Answer

What color plug where i ve got three colors blue,red,black


If I understand correctly, you are replacing a switch with the EJ500 timer.
You mention a 'plug'

The EJ500 has 3 wires: Black Red Blue.
If you are replacing a single-pole switch:
The switch has 2 wires, one of these wires is the Hot-from-breaker and the other wire goes to Load:
Timer-black connects to Hot-from-breaker.
Timer-blue connects to wire-going-to-Load.
Timer-red wire is capped off. Red is not used for single pole switch.
If you connect wires and your lights blink, then you put the red wire where the blues wire should go.
If you connect wires and lights do not operate, try reversing the blue and black wires.

I posted images of EJ500 wiring (the Intermatic EJ500 and ST01C have identical wiring
http://waterheatertimer.org/ST01C-program.html#ST01C

If you are replacing a 3-way switch, the wiring is more complicated.
The EJ500 can not replace a 3-way switch wire-for-wire.
Diagrams on link above show wiring for 3-way.
Add a comment if you need more help.

Nov 10, 2010 | Intermatic EJ500C - Indoor Digital Wall...

1 Answer

Bluetooth wiring diagram


you will need to search for a wiring diagram for your model of car radio

car kit blue - connect to ignition cable OR connects to switched 12v cable going to radio
car kit red - Direct to +terminal of battery OR to constant 12v cable going to radio
car kit black - connects to GROUND going to radio
car kit yellow - connects to mute function of radio if your radio supports it.

OR
connect blue and red together and directly to battery
and connect black to Body of vehicle
(not recommended as could result in draining of battery, even thought the kit is supposed to prevent this).

Jun 30, 2009 | Nokia Ck - 7w Bluetooth Wireless Hands -...

Not finding what you are looking for?
Stihl Hl75 Hl75k Hedge Trim Owners Instruction Manual Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stihl Garden Experts

Joseph Mueller
Joseph Mueller

Level 2 Expert

338 Answers

brotherscott

Level 1 Expert

5 Answers

ray gallant

Level 3 Expert

47694 Answers

Are you a Stihl Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...