Question about Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Efx

1 Answer

I am hooking up a Behringer xenyx 1002B Mic/Line Mixer to my Toshiba Satellite c885-S5194 laptop to broadcast online via meridix. I'm using Audio technica BPHS1 Headset Microphones with XLS plugs and 1/4 plugs for the headphone jack on the mixer. I have no troubles here. Because the mixer is not a USB mixer, I am using 1/8 lines to run into the mic and headphone jack on my laptop. I use iTunes to play my production stuff and commercials. In the headsets, thru the mixer the sound is great but playing back a test broadcast, the iTunes content is horrible. Sounds like someone is playing things off of their phone across the room and my mic is picking it up. I have used the same set up with excellent results with my friend's laptop but can't figure out why my laptop won't work. I'm guessing it's in the cords or in the jacks of the laptop.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

IF your Laptop has a stereo LINE 1/8" INPUT jack, you can take the Stereo ( Left & Right ) LINE outputs on your mixer and feed into this jack on your PC. You will need a 1/4" dual plug for the mixer end to a single 1/8" stereo plug on the PC end. I suspect the problem you are having is either related to your PC only have a MIC input jack or you have something set wrong in your PC's sound config. file. More information is needed to properly solve the problem.

Posted on Oct 20, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5603 Answers

SOURCE: behringer ub802 mixer is buzzing

If it buzzes when you have no inputs AND no output leads connected, there is a problem with the power supply... HOWEVER if you have used UNBALANCED output cables instead of the REQUIRED TRS BALANCED output cables, it is possible the noise is being driven backwards and that is what you are hearing. Note that at full gains, there often is a tiny bit of noise, usually hiss. Also make sure the supply is powered from the SAME receptacle as the equipment this drives such as an amp or powered speakers.

Posted on Jul 19, 2011

kadewet
  • 46 Answers

SOURCE: Behringer Xenyx 502 Mic buzzing...PLEASE HELP

Get yourself anti-static spray and spray over the connector before inserting into the jack, most times its dust or static buildup which causes that buzzing sound and in other times replace your mic

Posted on Mar 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got behringer 802 audio mixer and a mic..what else do i need to start singing..


Please verify if your computer has a sound card. You will need a provision on your computer for audio input. Let me know.

Dec 26, 2014 | Behringer XENYX 802 Mixer

1 Answer

Behringer Xenyx 502 Mic buzzing...PLEASE HELP


Get yourself anti-static spray and spray over the connector before inserting into the jack, most times its dust or static buildup which causes that buzzing sound and in other times replace your mic

Mar 02, 2012 | Behringer Xenyx 502 Audio Live Music Mixer...

1 Answer

How would i connect a Behringer 1002B Xenyx to a hercules mk4 mixer


The main output jacks of the 1002 are PSUEDO balanced so you can use TS to RCA connections from the 1002 to the MK4. It is not hte best design, but it will work... with two cables go from the 1002 main outs to the stereo ins of the MK4.

Sep 19, 2011 | Behringer XENYX 1002B Mixer

1 Answer

Have a Behringer 1202 Xenyx FX, balanced cable into a new windows 7 PC and keep getting hiss. When I raise the gain, mic or master volume the hiss is more awful. my internet broadcasts sound awful. what am...


You are running your balanced cable into a windows 7 PC? What interface are you using... not the line input on the PC I hope as it is NOT balanced... it is Stereo input with UNBALANCED input. If you tie the mixer using a balanced to 1/8 inch balanced connector you will get plenty of hiss since you are driving the stereo channels oppositely. For high quality, get a good audio interface that runs on the USB of the PC. If you can tolerate a bit of noise but wire it correctly, then you will need to use two UNBALANCED lines out of the mixer for L and R and merge them to a stereo 1/8 inch plug for the PC.

Jul 10, 2011 | Behringer Xenyx 2222fx Premium 22 Input...

1 Answer

I used my Behringer 802 mixer for the first time lastnight and when i woke up this morning and tried to record,the sound was very distant and hardly audible.I tried to raise the volume by turning the main...


What are you recording from? If using a condenser mic and you fail to turn on the Phantom power, symptoms such as you describe would occur. You don't include enough information about your setup to allow us to help.

Jun 27, 2011 | Behringer XENYX 1002B Mixer

1 Answer

I was just wondering how many watts the behringer xenyx 1222usb mixer can push?


The board is a mixer only, not an amplifier. A mixer simply, well, mixes audio sources into a line output which then goes to the amplifier. Your question really has no answer since wattage is determined by the amplifier used. Essentially, it can "push" as many watts as the amplifier can deliver.

Jun 23, 2011 | Behringer XENYX 1222FX MIX BOARD

1 Answer

How do I hook my preamp up to my computer?


Either through your computer's soundcard (1/8" mic input) or you'll have to get an interface such a an M-Audio FastTrack. There has to be something that converts the analog sound from the mixer to digital info that you're computer can utilize.

Jan 13, 2011 | Behringer Xenyx 502 Audio Live Music Mixer...

1 Answer

I have a Xenyx 1002, and my microphone is 1/4 Jack, should I use a adapter to convert it to xlr, so I can plug it in. Can I plug my 1/4 to Line in directly


You can't do any damage... just try plugging into the line... If the mic has enough output it may work. Balanced line mics are best though...

Dec 15, 2010 | Behringer Xenyx 1002fx Mixer 10 Input 2...

1 Answer

How do i hook up a powered moniter to the behringer xenyx 2442fx mixer?


hook it up to one of the aux output sends (1 or 2), and use the corresponding aux send knob per channel to put each channel necesarry into the monitor signal.

Nov 20, 2010 | Behringer XENYX 2442FX Mixer

1 Answer

Whow i connect my xenyx 1002 mixer to audiophil 2496 sound card


You must connect:
the main out of the 1002, or the ctrl room out of the 1002 at your power amplifier's input.
the line in 9/10 of the 1002 at your 2496's line out.
the cd/tape out of the 1002 at your 2496's line in.
in case of a cd connect it's line out at line in 3/4, or line in 7/8 of 1002
some mic at the mic 1 or mic 2 of 1002.
That's the way you're going to have control for:
the mic level from channel 1 or 2.
cd level from channel 3/4 or 7/8.
pc playback from channel 9/10.
master speakers from main mix or ctrl room.
All the above connections are not absolute and may vary depending on your needs.

In case of a problem or clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios

Dec 03, 2009 | Behringer Xenyx 1002fx Mixer 10 Input 2...

Not finding what you are looking for?

Open Questions:

See all Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Questions

Behringer Xenyx 1002fx Mixer 10 Input 2 Bus with Efx Logo

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Michial Gueffroy

Level 3 Expert

1138 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...