Question about Yamaha RX-V2700 Receiver
I have a DirecTV HR10-250 hooked to Yamaha RX-V2700 via HDMI cable. Everytime I cycle power to the Yamaha RX-V2700, the HR10-250 switches video mode to 480P from 720P. Anyone know why this is happening?
tell cable box 480 i putput not 720 p even tho big screen has hd inputs its not true hd ok unplug plug back in see if get cable box to defult u or take card in front in and out most likely tv cant handle 720 p or 1080 i if its on 1080 i bring to 720 still no pic tak ethe cable box out settings to 480 i ok try that 1st
Posted on Jan 06, 2008
Reset the yamaha player to factory sttings and check if the issue still exists ,unplug all the cables and replug the cables if the issues still exists its the problem with the Yamaha receiver, please get it changed as its a new player................................
Posted on Jun 10, 2008
Okay...my first contribution to any forum but I have the same problem (Yamaha RX-V663 and Samsung Blu Ray) and found the solution. The problem is you probably have your HDMI cables from your DVD player and reciever connected to a DVI input on your TV. The DVI may have problems communicating--not HDCP compliant. My system was working great then I hit a button on my remote...just playing around. I think it was the pure audio and I turned off the receiver. After that, the audio worked but there was no video. After many frustrating hours, the fix was to unplug the HDMI and DVI cable then turn the power off, cycle the power again, and plug the HDMI and DVI cables back in (the DVI was the last cable plugged in, not sure if that matters). By unplugging everthing you've reset the communication between the HDMI components and the DVI TV.
See page 18 of the yamaha owners manual, second to last note on bottom right of the page. It says there may be a problem...
I also noticed that the yamaha reciever was sending 1080p (my older tv is 1080I) and that is why the video wouldn't display on the TV. You can see this in the video signal info screen, unfortunately there is no setting to switch it back, just recycle the cables and power and it should reset.
Uncredibly frustrating but I got my picture back!
Posted on Jan 10, 2009
Make sure that you have the correct input signal selected.
Also, check if the sound is not muted.
If you have a multi-room speaker switch, make sure it is set correctly to main speakers.
Posted on Apr 28, 2009
i have no sound when trying to watch a dvd through my rxv2700. the dvd player is an insigna blue rya player. It worked at first but not now
Posted on Jun 20, 2009
Tips for a great answer:
May 10, 2012 | Yamaha Audio & Video Receivers
May 22, 2008 | Yamaha RX-V2700 Receiver
Apr 24, 2011 | Yamaha RXV467 Receiver
Oct 11, 2010 | Yamaha RX-V2700 Receiver
Nov 25, 2009 | Yamaha RX-V2700 Receiver
Nov 25, 2009 | Yamaha Rx-v365 A/V Home Theater Receiver
Jun 05, 2009 | Yamaha RX-V463 Receiver
Dec 01, 2008 | Yamaha RX-V663 Receiver
Jan 18, 2008 | Yamaha RX-V2700 Receiver
Jan 06, 2008 | Yamaha RX-V2700 Receiver
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: