Question about Computers & Internet
In any computer you can reset the BIOS password by removing the CMOS battery out and then put it in again also Mother-board have a jumpher with the name of RESET BIOS you can use it as well.
Posted on Oct 18, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you should still be able to boot the machine even if the on/off button is missing, try poke the flat end of a pencil down the hole and apply just a little pressure and pull the pencil out and the laptop should boot, to reapir this you need to remove the panel that goes accross the top of the keyboard, this can be hard to do because of how they are clipped together, you should not have to remove anything else because this will reveal where the "power on" board is, all you need to do is replace the button or the panel, you may even find the the original button
hope this helps
Posted on Nov 20, 2008
This information is intended for experienced users. It is not intended for basic users, hackers, or computer thieves. Please do not try any of following procedures if you are not familiar with computer hardware. I'll not be responsible for the use or misuse of this information, including personal injury, loss of data or hardware damage. So use it at your own risk.
A. By Using the Motherboard Jumper:
In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method.
Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper varies depending upon the motherboard brand. You should read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc.
When you find the jumper, look carefully. There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin.
Make sure to turn the PC off before opening the cabinet and resetting the jumper.
B. By Using Software:
I have found that BIOS/CMOS Password Recovery Tool is the most effective.:
BIOS/CMOS Password Recovery Tool is a program that works instantly to remove any lost or forgotten BIOS/CMOS password. Simply boot your PC to DOS and execute the program, and get access to forgotten BIOS/CMOS passwords in just seconds
BIOS/CMOS Password Recovery Tool Service: http://www.biospasswordrecovery.com/
Posted on Jul 06, 2010
SOURCE: i forget bios pasword my
Though this may not be exactly your computer, the following visual steps will help you.
All you need to do, is remove the Nickel sized battery, that is on the main board.
Leave it removed for at least 3 minutes.
Place battery back into the main board, and reassemble computer.
This will most likely be the only way to solve this.
Posted on Feb 28, 2011
Tips for a great answer:
Mar 25, 2011 | Computers & Internet
Jul 25, 2010 | HP NX9010 Notebook
May 25, 2010 | HP NX9010 Notebook
Nov 06, 2009 | HP Compaq nx9010
Apr 11, 2009 | HP Compaq nx9010
Mar 18, 2009 | HP Compaq Business Notebook NX9010
Nov 20, 2008 | HP Compaq Business Notebook NX9010
Oct 11, 2007 | HP Compaq Presario 2500 HP Pavilion ZE...
35 people viewed this question
Usually answered in minutes!