Question about Sennheiser HDR 120 Consumer Headphones

Open Question

The receiver light on charging station has 2 lights. one red one green. when you put the headphones on the station, the green light indicates it is charging, the red means its not charging. Now mine shows no light at all????

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 155 Answers

SOURCE: There in no green light

The green light only comes on when it is receiving an audio signal.

Standard batteries will work.. if you NEVER use the charging station.. and plan on replacing them every x number of hours used.. IMPORTANT.. if you forget.. and place the headset on the charging station with standard batteries.. they will probably rupture.. and may well ruin the headset..

If you decide to replace the chargable batteries.. make sure you replace them with the right size and type..

Posted on Apr 24, 2009

  • 155 Answers

SOURCE: No green On/Off light. Charge light is red. I hear only static.

Two things.. Check the batteries..
Also.. since these headphones have to have a signal sent to them to activate transmission (green light simply indicates they are receiving a signal) it can take a few moments after the signal begins to activate them.
I would hazard a guess that when you unplug the cables and then plug them back in.. the feedback that generates activates the base much the same as a regular audio signal would
Finally.. make sure the source is a fixed output.. if not.. and its variable..you will have to increase the output or volume to activate the base..

Good luck!

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. I just purchased the insignia digital wireless headphones for my boyfriend and the headphones won't charge properly. It says to put the on the dock station and the red light will stay on(up to 4 hours)...


If the red light is on for such a short period of time, it probably means that the headphones are charged. The red light will flash for a long time and then turn green only when you charge on the dock headphones that need charging. I suggest to try to use them without charging them and see if the headphones work.

Dec 30, 2014 | Audio Players & Recorders

1 Answer

Line 1 disconnects people on hold


Try these first and let me know
Intercom does not function correctly
• Make sure line 1 is connected properly and common to all phones on the system.
• Make sure all phone ID’s (station numbers) involved have been assigned.
Transfer does not function correctly
• Make sure receiver phones (stations) have same line connected.
Intercom indicator turns red and green alternately
• The station address needs to be re-assigned due to a duplicate station address in the system. See “Changing the Phone ID (Station Address)”.
Good luck,
Lee

Jun 17, 2008 | GE RCA 4-Line Speakerphone

1 Answer

Hi. We have a NYKO Charge Station for the XBox 360.. What do the indicator lights.. Green? Red? Thanks.


Hello

The red light means its charging, then when its done charging it turns green briefly then the lights and charger turn off and the controller is ready.

Please rate.

Aug 17, 2011 | Nyko Charge Station 360 For Xbox 360

1 Answer

Bose QC 2 Noise Cancelling Headphones the red light is on. Should there be a green light if they are working?


No green light for QC2, just red. If it's constant the battery is charged, powering the noise cancellation, and, if connected to an audio device, conducting sound. If the red light is blinking, the battery is losing its charge.

Nov 18, 2010 | Bose ® QuietComfort® 2 Acoustic...

1 Answer

The operating instructions say that after 16 hours the red power/charge indicator light would go out, indicating the batteries are fully charged. After 3 days the red light on my unit is still on. The...


I have the MDR-RF970R but I bet the battery is the same. If you have had the headphone for seceral years then I bet you are right, the battery is going. You might try using them till the battery dies and then recharge. This is called deep cycle and may time it will extend the life of rechargables.

If the headphones are new, then just check and make sure that they going all the way into the charge slot.

I will say it is not common for me to see the light off, but I use the headphones all the time.

Good luck.

Apr 30, 2010 | Sony MDR-RF970RK Headphones

1 Answer

When connecting up to charge red light comes on 'power on' button on front and no charging happens - any ideas? thanks


What does indicator light mean?
  • Steady red light: Battery is charging.
  • Steady green light: Battery is fully charged.
  • Flashing red light: Battery needs charging.
  • Flashing green light: The music receiver is switched on.
  • Flashing red/green light: The music receiver is available to be added to your phone.

Aug 24, 2009 | Sony Ericsson T303 Mobile Phone (Shadow...

2 Answers

No sound from RS130 headphones


I'm having the same problem with the RS140. Only a few weeks old, and no sound at all coming out (not even the beeps). Have replaced batteries and tried a different audio source. Base station lights are on and indicating it is receiving an audio signal, but nothing is going go the headphones.

Jun 25, 2009 | Sennheiser RS130 Wireless Headset

1 Answer

No green On/Off light. Charge light is red. I hear only static.


Two things.. Check the batteries..
Also.. since these headphones have to have a signal sent to them to activate transmission (green light simply indicates they are receiving a signal) it can take a few moments after the signal begins to activate them.
I would hazard a guess that when you unplug the cables and then plug them back in.. the feedback that generates activates the base much the same as a regular audio signal would
Finally.. make sure the source is a fixed output.. if not.. and its variable..you will have to increase the output or volume to activate the base..

Good luck!

Jan 26, 2009 | Sennheiser RS 120 Consumer Headphones

2 Answers

There in no green light on RS 120. There is a red light on indicating that the headphone is being charged. Why I cannot use non-chargeable AAA batteries?


The green light only comes on when it is receiving an audio signal.

Standard batteries will work.. if you NEVER use the charging station.. and plan on replacing them every x number of hours used.. IMPORTANT.. if you forget.. and place the headset on the charging station with standard batteries.. they will probably rupture.. and may well ruin the headset..

If you decide to replace the chargable batteries.. make sure you replace them with the right size and type..

Jan 08, 2009 | Sennheiser RS 120 Consumer Headphones

Not finding what you are looking for?
Sennheiser HDR 120 Consumer Headphones Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sennheiser Audio Players & Recorders Experts

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Brad Brown

Level 3 Expert

15451 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Sennheiser Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...