Question about Mesa Safes MFL2014E Safe Depository Safe 09 Cubic Feet

1 Answer

I need to reset my combination to my mesa safe

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

This safe was shipped with a factory Master Code of 1-2-3-4-5-6-7-8.


If you changed the Master Code you will need to use the code you changed it to.


Deleting your current User Codes:
Input * - * lock will beep twice
input 6-6-6-# lock will beep twice
Input current Master Code - # lock will beep twice
Input user number - # lock will beep twice (not user code, user number is which user number you want to delete 1,2,3,4 or 5)
Re-input user number - # light stays green for 3 seconds

Example: * - * - 6 - 6 - 6 - # Master Code - # - 5 - # - 5 #
This will delete user 5
Unsuccessful code change: five beeps, repeat the steps.


Changing User Codes: Code length can be 3 to 8 digits long
Input * - * lock will beep twice
Input 4 - 4 - 4 - # lock will beep twice
Input Current User Code - # lock will beep twice
Input User Number - #
Input New User Code - # lock will beep twice
Re-input New User Code - # light stays green for 3 seconds

Example: * - * - 3 - 3 - 3 -# - User Code 2 - # - 2 - # -New User Code - # - New User Code - #

That example will change user code 2.
Unsuccessful Code Change: five beeps, repeat the steps.

There are other things you can do with the MSL-500 lock that comes on the MFL-2014E. You can change the master code, activate user codes, change user codes, delete user codes, set single user or dual user modes (dual user modes requires two user codes to be entered each time you want to open the safe, set the time delay.

The Mesa safe company has a website which does have the operating instructions for the MSL-500 electronic lock. A Google search of "Mesa MSL-500 Operating Instructions" would get you there quickly.

Posted on Jun 08, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where the black button in the safe so i can reset code


Inside the safe...open the safe you will see a button on the inside of the door.this is the re-set button..make sure the code you put in is working before closing the door.

Jun 08, 2014 | Mesa Safe MFL2014E Depository Safe

1 Answer

Combination will not open safe


I'm sure you have opened it by now. however, when the safe goes into lockout mode. You must wait for the lockout period to end. That length of time is customizable, so I can not say how long it will be. Most likely 10min to 1 hr. Then just enter the code normally.

Apr 02, 2014 | Mesa Home Security

1 Answer

Common Issues with Mesa Safes MFL2014E Safe Depository Safe 09 Cubic Feet


The most common issue with the MFL-2014E is the keypad. We have 7 of these safes in our company and I had been replacing the keypads all the time. Which wasn't too terrible while they were under warranty but if I remember correctly they want $60 for a replacement keypad out of warranty.

I started replacing the electronic lock and keypad with Sargent and Greenleaf models. S&G 6120-305 or S&G Titan 2006-108 and haven't had problems since. Mesa said they had an engineer team from overseas go over their keypads to figure out what the problem was. The feedback was their design was fine but the components were cheap and under par. I still had a problem with their resigned keypads however.

The only other problem I have had is the bars getting bent from people shutting the door on them and bending them. This can be fixed by taking the panel off the door and bending the bracket back flat with your hand. The metal there in a bit too flimsy in my opinion.

Mar 04, 2013 | Mesa Safes MFL2014E Safe Depository Safe...

1 Answer

Forgot mesa safe lock combo mfl 5oo


Have you changed the factory set Master Code?

May 29, 2012 | Mesa Safes MFL2014E Safe Depository Safe...

1 Answer

Suddenly we can't open our Church Safe. It has worked fine for almost 2 years. We have replaced the batteries with new fresh ones but still can't get the electronics to allow us to open it.


Hi.

The safe can lock up under determined conditions. Since safes are security anti-theft devices, in case they do not open, they can only be accessed with the help of the manufacturer.

Please, call Mesa Live Technical Support. The operators are available Monday - Friday 8:00am - 4:30pm (Pacific Standard Time)
The phone number is toll free. Here the number: (800) 490-5624.

Using Mesa online page you can also identify the model and download the manual. It is better finding out the safe model before contacting the Mesa by phone, so to speed up support operations.

Please click here to access Mesa support page.

Regards.

Ginko.

Mar 13, 2011 | Mesa 2 Hour Fire Safe 4.0 Cu. Ft....

1 Answer

Just bought a sentry digital safe at an estate auction. did not have a manual with it. do not have combination. how do i reset combination.


If you need your lost combination, you must send a notarized letter stating you are the owner of the safe. The link below will tell you everything that you will need to get your combination:

http://www.sentrysafeshop.com/Lost-Combination-Sentry-Safe-Combination-p/lost%20combination.htm

Jun 11, 2010 | Sentry Fireproof Safe

1 Answer

Need to open a Sentry keyless combination safe


First, has the factory combination been changed? Sentry has the code for the factory combination that they can supply you.

If the factory combination has been changed to something else, then Sentry won't have it.

In that case you need to ask Sentry for a 'reset' code combination. There is (at least) one back door to your safe -- a reset code.

The reset code will not tell you what your combination is, it will simply reset the combination to the factory combination.

You can take it from there.

Now, this isn't as hard as it may sound. There is an actual department that handles this at Sentry because you aren't the only one that cannot open his safe.

They'll want some proof of ownership, some $$ for the service, the safe serial number, and probably a notarized form claiming that the safe is yours.

Get 'hold of Sentry on the web and the rest is just process.

BTW -- this is exactly what the locksmith would do.

Apr 10, 2009 | Sentry Fireproof Safe

Not finding what you are looking for?
Mesa Safes MFL2014E Safe Depository Safe 09 Cubic Feet Logo

778 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mesa Home Security Experts

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15457 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Mesa Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...