Question about Lexmark X736de Color Laser Mfp Ms00301

Open Question

956.02 ERROR. Processor Fan Stalled - Lexmark X736de Color Laser Mfp Ms00301

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

System fan error

If you have replaced the fan and you are still getting a "Fan Error" then you have replaced the wrong fan. The system fan is not fitted to the top of the processor, it is usually fitted to the case.

Sep 08, 2013 | HP Pavilion m8120n PC Desktop

1 Answer

Fan error

This is an indication that a printer fan has stalled. Check the cable connections at J7 on the system board and at the main fan assembly. The main fan runs continuously when the printer is powered on unless the printer is in the Power Saver mode.

Dec 22, 2012 | Lexmark T630 Laser Printer

1 Answer

What is the processor fan speed for Dell Vostro A860?

This could be the result of to much dirt build up in the heat sink ports blocking vital air flow. Buy a can of compressed air and blow it on fan any open ports, this should prove if the fans the issue, the speed should slow down because of increase air flow cooling the laptop. If this works the machine should be taken apart for better clean out.

Mar 06, 2012 | Dell Vostro A860 Notebook

1 Answer

Processor fan and case cooling fan run for about 10 seconds then shut down. The power supply fan and light stay on but the screen stays black. I don't get any error beeps. I think that its the...


Please check the Processor must fit or not may this problem is With processor only and also check if processor gum is working or not

Thank u


Aug 31, 2011 | Computers & Internet

1 Answer

167 bios

To troubleshoot processor issues, follow these steps and test the processor after performing each one:

  • If either the system board or processor have been replaced, reflash the BIOS to the latest level before proceeding.

  • Some computers allow the fan to stop spinning. This is not a malfunction. The fan should start spinning as the system heats up.
  1. Ensure the latest BIOS code is installed. This will correct any 167 POST errors for the Intel microcode update and "176 No Processor CPUID" post errors.

  2. Reseat the processor and the heat sink

    Note: Do not touch either the processor or system board contacting surfaces. These can be extremely fragile and bent pin damage due to touching is not covered under warranty.

  3. Verify the processor fan operation is not blocked by cables or other hardware.

  4. Verify that any replacement processor is the correct architecture for the system.

May 25, 2011 | IBM NetVista PC Desktop

1 Answer

When i press the on button, the first logo screeen comes in abt 7-10 secs then after 3-5 secs fan error appears on a blank screen and after another 2-3 secs it shuts down by itself. I cannot boot...

the problem is simple. you need to first change the fan for the processor. The pc goes off since the fan to cool the processor is faulty.........just to prevent damage to the processor. get a correct model, normally by checking the spare part number on the fan and try googling it up on the net. need me know if you need assistance in buying one.
good luck.

Apr 03, 2011 | Computers & Internet

3 Answers

CPU Over Temperature Error

This error mostly comes with the failure of processor fan, overheating of processor shuts down the system due to processor's protection. You need to check the fans and replacement is recommended.
Hope this helps

Jan 31, 2011 | ASUS P5PE-VM Motherboard

1 Answer

Dell Poweredge 840 shutdown automatically

This error mostly comes with the failure of processor fan, overheating of processor shuts down the system due to processor's protection. You need to check the fans and replacement is recommended.
Hope this helps

Jan 31, 2011 | Dell PowerEdge 840 (becwmk1_2) Server

1 Answer

Computer turns on but no Video and doesn't go through POST.

Before you "fry it" try taking the CPU fan off of the processor, remove the processor, reinsert the processor and CPU fan and see what happens.

Nov 11, 2008 | Biostar M7VIG-400 (M7VIG 400-COMBO4)...

1 Answer

Processor fan

Maybe you have not put the correct fan on and it has shut down to protect itself. Processors overhead catastrophically in a matter of seconds. Also did you connect the fan to a power supply on the motherboard.

Mar 18, 2008 | Intel (SL5TL) Pentium 4, 2 GHz Processor

Not finding what you are looking for?
Lexmark X736de Color Laser Mfp Ms00301 Logo

Related Topics:

667 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Computers & Internet Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

micky dee

Level 3 Expert

2845 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Lexmark Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides