Question about Konica Minolta MAGICOLOR 7300EN LASERPR COL 20PPM 128MB ETH USB REFURBISHED Printer

1 Answer

Konica Minolta Problem

My Konica Minolta 7300 is printing out of register. Has anyone found a way of sorting this out?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 210 Answers
Re: Konica Minolta Problem

Check all your paper tray make sure all side guide are set properly to the size of your paper. Check the front on the right side there is a paper size nob and set to the size of the paper in the tray next to it. A sheet 8.5x11 paper on four side edge of the paper make an arrows marking and place it to platen glass and make copies and make sure to choose which paper tray you are using. The marking all should be in all four corner of the copies. if not recheck the paper tray side guide. if this did not work. what ever paper tray is off registration, removed the the paper and lift the pressure plate or lift plate there is two screws to loosen to adjust rear and front paper side guide.

Posted on Aug 10, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What's your question? my konica minolta c451e printing machine showed me an error code p21, what could that mean and it is not printing any image but black-green shade

P-21 - Color regist test pattern failure
• The number of points detected in the main scan direction is more or less than the specified value during main scan direction registration correction.
• The number of points detected in the sub scan direction is more or less than the specified value during sub scan direction registration correction.

P-21: Color regist test pattern failure
Relevant parts:
• Transfer belt unit
• PH unit
• Printer control board (PRCB)
1/ Wipe clean the surface of the transfer belt with a soft cloth, if it is dirty.
2/ Change the image transfer belt unit if the transfer belt is damaged.
3/ Change the PH unit.
4/ Change PRCB.

(See Service Manual, pages 599, 603):

See also here:
Konica Minolta Bizhub c451 Reparacin de Fotocopiadoras YoReparo
Thread Problemas na C451 7 21

May 31, 2015 | Konica Minolta Printers & Copiers

1 Answer

How we reset printer konica minolta 1390

About 88,000 results (0.73 seconds) Search Results

    [PDF]PagePro1380/1390 MF Service Manual - Printers - Konica ...
    the risk of damage to the product, KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. (hereafter called the KMBT) strongly recommends that all servicing be ...Missing: we

    [PDF]PagePro 1390 MF Printer / Copier / Scanner User's Guide
    PagePro is a trademark or registered trademark of KONICA MINOLTA. PRINTING .... Print Media 20. What Sizes of Media Can I Use? 20 .... Stop/Reset key. Exits the menu. ... Right-click the KONICA MINOLTA PagePro 1390 MF printer icon.

    [PDF]Technical Guide - Printers - Konica Minolta

Feb 12, 2014 | Konica Minolta PagePro 1380 MF Laser...

1 Answer

Multiple copy error

Turn OFF sorting and/or grouping in the finishing tab.

Sep 24, 2008 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Minolta magicolor 7300 message "print unit

Print head is passed its life which is the LASER get a new one.

Aug 05, 2008 | Minolta Printers & Copiers

1 Answer

Konica Minolta Magicolor 2400W -- Only Prints on Reboot!

I've had that problem before too, and found out that there were copies of the printer that had somehow installed themselves on my computer. All I needed to do was to choose to print with "konica minolta copy 1" instead of the one that I *thought* was installed and it worked. I then deleted the original printer and just stuck with the copy.

Jul 22, 2008 | Konica Minolta magicolor 2400 Laser...

1 Answer

Minolta 7300 - tearing through consumables

I've had the same issue with this printer. Are you using Minolta own brand cartridges? You should be.
It sounds like it is wasting a lot of toner. You'll need an engineer to check the drum mechanism.

Jan 22, 2008 | Minolta magicolor 7300 Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides