Question about HP Pavilion a620n (PC028A) PC Desktop

1 Answer

Reset bios woulnt display anything

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

When you say you "reset" the bios, what do you mean? Did you try to upgrade the bios firmware, and now the machine isn't working? Or is this a machine with a backup copy of the bios, and you were trying to restore from that? Or...did you go into the bios administration and use the "set all values to default" dialog to set everything back to the factory defaults?

We probably need to start back with why you were "resetting" the bios to begin with. So fill me in!

Posted on Oct 18, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

From asus p5kpl-am in bios i changed display i can't see anything on lcd monitor..but everything works fine like numlock,capslock...on keyboard..mouse..

Try clearing your CMOS. Turn off your computer and press the "clr CMOS" switch on the back I/O of the motherboard, this will reset the bios to factory defaults.

Jun 08, 2013 | Computers & Internet

2 Answers

When I turn my computer on it goes to a black screen and says: PXE-E61: Media test failure, check cable then it woulnt load What do i do

try pressing the f12 or whichever key it states on boot to get into the bios setting and check that it is set to boot from the hard drive and not a network

May 30, 2011 | Toshiba Satellite L455-S5009 laptop

1 Answer

845 mother board display in intel logo then shop

Start by pressing F2 repeatedly whilst switching on and this should allow you to get to the BIOS where i suspect you problem is.

Alternate you could reset the BIOS by moving the bios jumper to the clear position and powering on as this sends the board into maintenance mode to allow you to get to the BIOS.

It could also be that one of your components is not seated correctly.
if you have recently added anything or moved the computer then disconnect or remove anything you have added or disconnect each item one at a time and re-seat it (cables cards memory etc etc)

One of those should get you into a position to be able to diagnose the exact cause.


Jul 20, 2010 | IBM (25P3294) Motherboard

1 Answer

When booting up the screen displays FAN ERROR

Is the fun running? you can first confirm that before you alter anything in the Bios. touch on the fun air exit point you will feel it if its running.


May 05, 2010 | IBM ThinkPad T30 2366 Notebook

1 Answer

My video card stopped working. i changed the video

maybe it is your motherboard, reset bios ... because you can see anything do as it follows , unlupg power coard-open case - pull out little silver battery- wait 10 sec-put it back in- switch power cord and start your computer.. that will reset your bios. cmos more exactlly... if you see the boot menu it is ok.. but if you can go to os.. then you must set you bios video output to pci... try and write back

Feb 20, 2010 | Gateway GM5260 PC Desktop

1 Answer

My radio in my grand am woulnt display anything anymore but the radio still works fine along with the cd player can i fix this?

There may be a seperate fuse for the display, but I doubt it. If you shine a flashlight at the display it may become visible. Mine does.

Jul 05, 2009 | 2005 Pontiac Grand Am

1 Answer

Computer Monitor Switched OFF By BIOS SETTINGS

You will need to reset your BIOS setting to its default.

Every motherboard is equip with a jumper called clrtc (Clear RTC), look in your motherboard manual to find out how to use it to reset your BIOS. Or if you know the type of your motherboard, please share it.

Dec 14, 2008 | Intel Motherboard

1 Answer

Changed BIOS and now emachine w3052 woulnt boot

try resetting BIOS
On the motherboard will be written clear cmos or bios this will be a small 2 or 3 pin connector
2 pin remove the jumper which is only on one pin and fit it over both for 15 or 20 seconds remove jumper fit back over 1 pin reboot all things being equal your computer should start

3 pin remove jumper from pins noting which pins it is on fit jumper over middle pin and the one it was not on before leave for 15 or 20 seconds replace jumper over original pins and reboot

Jul 30, 2008 | E-Machines Computers & Internet

1 Answer


if you are unable to see the bios boot screen and there is just a flashing cursor in the top left of the screen you may need to reset the bios, if still nothing the cmos chip is faulty and only a replacement motherboard will solve it.

Sep 24, 2007 | NEC PGA370 SIS620 ATX Motherboard...

Not finding what you are looking for?
HP Pavilion a620n (PC028A) PC Desktop Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides