Question about Washing Machines
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your maytag is really an amana and the bearings are bad. Yes it does cost a lot. If i were you i would buy another washer. Get a whirlpool. (whirlpool now owns maytag)
Posted on Nov 18, 2008
Remove the front panel and you will see two metal guides attached to the front of the frame. One of them will probably be bent and the transmission assembly will have jumped over one or the other of the guides. You need to manually pull it back to center then straighten the bent guide. May have been caused by load being out of balance or machine not properly leveled. Good luck.
Posted on Mar 12, 2009
Its probably you stator plate and rotor. But you need special tools for this repair. There a spring that is under 200 pounds of pressure and if you take the screws off that hold the plate its going to fly into you face if your dont use the special tools to depress the spring. Is it more of a clanking kinda of noise? DOes it olnly happen with heavy loads? Try this out. Fill the washer with water only. and get it into a wash cycle with water only. If there is no noise then put in like a load of towels. A heavy load. Now if you hear the noise now then its for sure you stator plate and rotor..hope this helps, but like i said you need those special tools to do this repair or injury can result from the spring part.
Posted on Jul 27, 2009
Tips for a great answer:
Dec 03, 2015 | Washing Machines
Nov 26, 2013 | Maytag Bravos Series MVWB850YW 28"...
Sep 05, 2010 | Maytag Atlantis MAV6000 Top Load Washer
May 17, 2010 | Maytag Atlantis MAV6000 Top Load Washer
Jan 03, 2010 | Whirlpool Ultimate Care II GSW9650LW Top...
May 24, 2009 | Maytag Legacy Series Top Load Washer
Dec 29, 2008 | Admiral AW22 Top Load Washer
Nov 16, 2008 | Maytag Atlantis MAV6000 Top Load Washer
Sep 02, 2008 | Amana NAV5800A Top Load Washer
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: