Question about Precor C956i Treadmills with HR / WholeSale

1 Answer

Precor 956i won't turn on. It was just working. I unplugged it to re-arrange power cord and now it won't power up.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Precor Master
  • 12,223 Answers

See the video attached. God bless you

Posted on Oct 18, 2013

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Precor experience

Even in a commercial environment, the batteries eventually go dead. Will they go dead faster because of lack of use? Depends on what exactly 'occasionally' means in your case. If it means rarely, then get an adapter.

Aug 22, 2014 | Precor 956i Experience Remanufactured

1 Answer

Precor 956i

Sometimes a bad MCB will cause a vibration at certain low speeds. If you have another unit, swap MCBs to verify.

Feb 07, 2014 | Precor C956i Treadmills with HR /...

1 Answer

Hello, I need a circuit board for Precor 956i, international model (230v).

Dear Sir:

You can go +

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a

Mar 08, 2012 | Exercise & Fitness

1 Answer

Won't turn on

Check the battery and or power cord for the proper voltage.

Video about How to Test Battery

Jan 26, 2012 | Precor EFX 546i Elliptical Version 4

1 Answer

On switching machine on `STUCK KEY` appears on console and machine will not work

Precor Error 05, Key Depressed at Power Up
Probable Cause 1. A key is permanently depressed on the display.
2. An interface chip (IC) has failed in the upper PCA's keypad.
3. Liquid (cleaning solution or sweat) may be on the surface of a touch sensitive display.

Corrective Action
  1. Disconnect the keypad cable from the upper PCA. Reset power to the machine. If the Error 05 is eliminated, the keypad is the cause and should be replaced.
  2. Disconnect the keypad cable from the upper PCA. Reset power to the machine. If the Error 05 still appears, the upper PCA* is the cause and should be replaced. *Upper PCA's most commonly do not come with software. Remove the software (chip) from the existing upper PCA prior to replacement and install into the new upper PCA.
  3. Wipe away all liquid from the touch sensitive display. Reset power to the unit. If the Error 05 is eliminated, the liquid was the cause.
This link will take you to the parts available for these models. Because most machines are serial number specific, you will need to narrow your search based on your particular model and serial number.

Repair Parts for Precor C956i Treadmills 120VAC 240VAC SPORTSMITH net

Sep 23, 2011 | Precor 956i Experience Series Treadmill...

1 Answer

Power keeps cutting out when clients are running on it.

When a running belt has excessive wear, it creates a lot of friction which causes the drive motor to work harder. When the drive motor works harder it will start overheating. If the belt is not lubricated periodically, it will ruin the deck, the drive motor, and cause other electrical problems such as tripping the breaker [after a while, the circuit breaker on the treadmill will need to be replaced.
It is suggested to lubricate the belt every month. At this point, you may need to replace both your deck and your running belt.

With your model and serial number, you can visit our website and view the products we have available for your particular machine.
Precor Parts for 952i 954 954i 956 956i Treadmills SPORTSMITH net

Apr 16, 2011 | Precor C956i Treadmills with HR /...

1 Answer

Belts are slipping,

your treadmill's belt is loose. You have to tight the belt from the both side.
all the treadmills follow the same procedure for tightening the waking belt. Watch the following video for the same.

Mar 16, 2011 | Precor 956i Experience Series Treadmill...

1 Answer

We have a 2 new 956i treadmills why don't they run with a GFCI or will they?

Most treadmills are designed to use the ground to disperse extra static energy - the ground on the GFCI is used to detect fluctuations in the current flow from the hot to the neutral side. The difference in current flow can be as small as 5 milliamps. When the ground pin on the GFCI detects this fluctuation, the ground will open the circuit. This is why it is not recommended to plug a treadmill into a GFCI.

Nov 17, 2010 | Precor 956i Experience Series Treadmill...

1 Answer

On my Precor 956 i the Stop Key prompt appears

There is a micro switch under the red "Stop" button. The switch is stuck and needs to be replaced.

Oct 24, 2010 | Precor 956i Experience Series Treadmill...

Not finding what you are looking for?
Precor C956i Treadmills with HR / WholeSale Logo

Related Topics:

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top Precor Exercise & Fitness Experts

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

914 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Precor Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides