Question about RCA 32F531T 32" TV

2 Answers

Power problem rca 32v434t

Rca 32v434t . have 2 of same tv. the one that is the problem has a picture problem. When power is applied the ac switch on board clicks. 15 seconds later the same switch clicks again. When i press the power button switch(key) same power switch model clicks,the board has power(120 v). the led blinks like other TV but after 10 seconds the good tv comes on and led stays on. the bad tv led stays on but no picture. the light source does not come on. can i check the high power transformer or the Fly back. Working back from the board on the tube where should I check. There should some humming sound if the tube was recieving the proper voltage? By the I checked all the switches on front of tv. thanks for help!!

Posted by on

  • 3 more comments 
  • vaginyacuzin Jun 18, 2008

    I went on vacation for six days. When I returned, my tv would not come on. It was working fine when I left. There is no indication of power.I was given the suggestion of unplugging it for a while. After 24 hours, it's still not coming on. The tv is an RCA 32V434T.

  • popeks Jun 29, 2008

    tv just won't come on. took it to a tv fix it shop and he said it was the "high voltage power supply". He wanted $195 to fix it.... is it worth is or is just blowing smoke.....

    Kenton in Baton Rouge

  • Keathmanns Sep 19, 2008

    I have a rca 32v434t and it shut off and will not come back on

  • 0RiCk Nov 14, 2008

    i have the same problem. it started when i was watching tv and i dont know how it would be broken since it is only a year old.

  • ffndarmy Nov 28, 2008

    Power in the home shut off for some reason, after coming back on, the television failed to operate. The led blinks for a min. and then goes straight lit with no picture. It is less than 2 years old.



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can still get fly backs need one email me and i can sell u one for 30.00 plus ship &handling ( for terryfic)

Posted on Feb 24, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

RCA 32V434T likely has a bad flyback--#271996. RCA 32F531T flyback no longer available,#262343 Fix one,dispose of other.

Posted on Sep 26, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

RCA 32V434T (32'') TV has no Red or Green pixels, only Blue

The color problems are caused by cracked/broken solder joints on the circuit that controls the display.  Usually this is located at the back of the tube on a small circuit board. Your description suggests that only the blue signal circuit is intact. I suggest these joints be resoldered for more strength.
It's a possibility that another IC senses this problem (or another one) and then shuts down the system.
Resolder those joints and see what happens.

Jun 03, 2009 | Televison & Video

1 Answer

RCA 32V434T Flashing Red Light

Flashing protect mode..internal shorted component.

Aug 14, 2008 | RCA F32450 32" TV

1 Answer

RCA 32V434T Changed recomended part: New Problem

Was the xformer RCA, new in the box ?.........

The silicon rubber seal is to moisture entry. Do not re-apply.
Make sure your connection is good.......

Did you hook-up signal to verify no sound ?

NSNP , HV ok = something wrong other than xformer....

Check all power supply voltages.....................T.

Check top of electrolytic caps for expanded,bulged or
what techs call "pooched".....................

Apr 17, 2008 | Televison & Video

2 Answers

Rca 32v434T need part numbers

The H.O.T. Transistor number (original is 2SD3402 (which is no longer available)) it's replacement is the 2SC5902.

The H.O.T. Transformer part Number is RCA 271996

Oct 30, 2007 | RCA 32V550T 32" TV

13 Answers

RCA 32v434t

Has anyone confirmed what the problem is? Mine wont turn on. The red light next to the power button just stays lit when pressed.

Oct 22, 2007 | RCA 32V420T 32" TV

4 Answers

Rca 32v434t

went in the menu and blocked the panel buttons on accident

Oct 13, 2007 | RCA 32V550T 32" TV

2 Answers

32v434t dead

please go according to procedure 1 isolate h/output section supply. 2 check power supply output is ok if not repaire it. 3 after power supply is ok 4 check hor osc, driver &output if problem repair it. 5 check for loose contact or print break. 6 connect supply to hor section. set will work fine. good luck.

Sep 21, 2007 | RCA 32V550T 32" TV

1 Answer

F32560 Rca Chirping

Replace IHVT aka flyback xformer part#257805 and horiz o/p xistor part # 237470.

Nov 30, 2006 | RCA F32650 32" TV

Not finding what you are looking for?
RCA 32F531T 32" TV Logo

Related Topics:

631 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75017 Answers


Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides