The green "Clean" light is flashing in intervals of 7. It won't let me start a new wash cycle. Any thoughts?
Comments:
Apr 25, 2009
- It worked! Instead of "Air Dry" I pushed the "Heated Dry" button, since I don't have an Air Dry button. But worked the same. Thanks so much applguy! I really appreciate it.
Press these buttons in succession, within 5 seconds: high temp wash, air dry, high temp wash, air dry. If the sequence is entered properly, all of the control panel LED's will illuminate simultaneously. Once this happens, press the cancel button twice. Now you should run a complete cycle again. If the dishwasher actually has a problem, it will fault again (means the unit isn't heating properly). If not, it's business as usual.
the delay light is on and the dishwasher will not start. I want to run the dishwasher now and not...
(More)
the delay light is on and the dishwasher will not start. I want to run the dishwasher now and not later
Dishwasher makes loud buzzing sound for 2 to 3 minutes when the wash cycle is due to start. After a...
(More)
Dishwasher makes loud buzzing sound for 2 to 3 minutes when the wash cycle is due to start. After a few minutes it stops but starts again after another few minutes. A slight overheating smell is also present. Machine is draining properly.