Question about Equity Time USA Audio Players & Recorders

1 Answer

I have a insta - set clock radio model 44200 just open pkg noticed next to electrical cord hole there a small hole and there a 7 inch thin wire hanging out of hole is this extra wire they forgot to cut is it safe to use had clock for a while never opened it or used it was pkged well

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Equity Time USA Master
  • 102,366 Answers

That's the radio antenna. Just tuck it under the unit or along the back of the shelf or whatever if you get adequate reception. If you don't then you might try fussing with it--taping it up the wall, draping it over a book, that kind of stuff.

Posted on Oct 17, 2013

  • kakima Oct 17, 2013

    That's the radio antenna. Just tuck it under the unit or along the back of the shelf or whatever if you get adequate reception. If you don't then you might try fussing with it--taping it up the wall, draping it over a book, that kind of stuff.

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: complicated GE clock radio/CD player

To set the time:
Hit the SET Wake/Time Button closest to the CD player until the clock face appears in the bottom left hand of the display.

Use the TRACK Rev Search Fwd Arrows to adjust the time.
Rev will decrease by minutes and Fwd will increase by minutes.

Hope this helps.

Posted on Mar 09, 2008

  • 1 Answer

SOURCE: Setting the time on my clock on radio Model # RP3755B

Well, I have an RCA clock radio/CD player and just figured it out. Press the "Time" button and hold it down while pressing the CD "Forward" button. Hope it works for you! Ron

Posted on Mar 14, 2010

jyackle5
  • 8197 Answers

SOURCE: alarm clock GE model no. 7-4894A but no manual

You can down load the manual on link below for free.

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000045591.pdf

Good Luck and please rate 4 thumbs up for the free answer.

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Equity Time Insta-Set Model 40018. I lost the directions about how to set it. How do I get the directions? Are they available online?


Model 40018: You do not need the 9-volt battery to operate this clock.
NO TIME DISPLAYED WHEN PLUGGED INTO AC POWER:
If the display is blank when plugged into the AC outlet, unplug from AC power and remove the Insta-Set battery (lithium button cell), then plug into AC power again and manually set the Time and Date.
  • HOUR: Press and hold the DST SET button for 7 seconds until the 12:00 flashes. Use the PLUS and MINUS buttons to set the Hour. Press and release the DST button to move to the Minutes.
  • MINUTES: The Minutes will be flashing. Use the PLUS and MINUS buttons to set the Minutes. Press and release the DST SET button to move to the Month.
  • MONTH:The Month will be flashing. Use the PLUS and MINUS buttons to set the Month. Press and release the DST SET button to move to the Date.
  • DATE: TheDate will be flashing. Use the PLUS and MINUS buttons to set the Date. Press and release the DST SET button to move to the Year.
  • YEAR: The Minutes will be flashing. Use the PLUS and MINUS buttons to set the Year. Press and release the DST SET button to secure the setting in the memory.
After completing the manual set for time and date, insert a fresh Insta-Set button cell battery and the settings will automatically be stored in the clock.

Jan 31, 2015 | Audio Players & Recorders

1 Answer

Hi I have a insta set model 44200 clock radio just open pkg noticed next to electrical plug there a small hole with a 7 inch thin coated wire coming out of it what is this is it safe to use


That's the radio antenna. Just tuck it under the unit or along the back of the shelf or whatever if you get adequate reception. If you don't then you might try fussing with it--taping it up the wall, draping it over a book, that kind of stuff.

Oct 17, 2013 | Equity Time USA Insta-Set 44200 Clock...

1 Answer

How do I switch Equity 44200 from Celius to Farenheit?


Hold the Alarm 2 button down to change from Celsius to Fahrenheit.

Jan 19, 2012 | Equity Time USA Insta-Set 44200 Clock...

1 Answer

My electric garage door goes up only 6 inches and the comes down 3 inches when I use the remote. I noticed a Thin wire/cable hanging. I have no other entry door to the garage other than the garage door....


A door technician uses a special tool to pull the emergency release after drilling a small hole in the door. The door can then be lifted without damaging anything. A keyed manual release assembly is then installed in the hole to be used if there are problems in the future like a power outage or malfunction like you have now.

Nov 15, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Need to know how to set time on ISTA SET 40009


Instructions
    • 1 Press and hold the "Alarm Set" button for five to seven seconds if you have an Insta-Set 40001, 44100 or 44200 model; the year will begin to blink when the clock is ready for adjustment. If you have an Insta-Set 40009 or 40018, hold the "DST" button for five to seven seconds (until the hour begins to blink).
    • 2 Set the year by pressing the right-arrow, "Up" or "+" button, depending on your model of clock.
    • 3 Set the month, day, hour and minute. Press the "Alarm Set" or "DST" button to cycle through each field, and use the "Up," "+" or right-arrow button to adjust the values within each field.
    • 4 Press the "Alarm Set" or "DST" button after setting the date and time to store the information into your clock's memory.

Read more: How to Change the Time on an Equity Insta-Set Clock ' eHow.com http://www.ehow.com/how_5657092_change-time-equity-insta_set-clock.html#ixzz1d1qIibS4

Nov 07, 2011 | Equity Time USA Insta-Set 40009 clock

1 Answer

This clock is an automatic set clock and it is 15 minutes ahead in each timezone and is not able to be reset by us


Press and hold the "Alarm Set" button for five to seven seconds and the year will begin to blink when the clock is ready for adjustment. .

Set the year by pressing the right-arrow, "Up" or "+" button, depending on your model of clock.

Set the month, day, hour and minute. Press the "Alarm Set" or "DST" button to cycle through each field, and use the "Up," "+" or right-arrow button to adjust the values within each field.

Press the "Alarm Set" or "DST" button after setting the date and time to store the information into your clock's memory.

Press alarm 2 to change from Celsius to Fahrenheit.

Press alarm 1 to change from 24 hr time to 12 hr time.

Aug 08, 2011 | Equity Time USA Insta-Set 44200 Clock...

1 Answer

Need to reset the time display on a equitytime model 40009


This solution from the answers below worked on my model 40007 clock today: If you hold down the button on top that says DST for like 10 seconds it will allow you to force change the time.
Thanks. wd 11/21/2010

Mar 15, 2010 | Equity Time USA Insta-Set 44200 Clock...

2 Answers

I have 2 clocks (model 40009,40010)that have inaccurate time


I read the manual which said to depress the alarm button. That wasn't the right button but I found that depressing the button next to it, the DST button, that that fixed the problem.
Thanks.

Oct 24, 2009 | Equity Time USA 30731 LED Digital Electric...

1 Answer

How do i change from military time on a insta-set alarm model 40009?


This may or may not work. The 40009 and 40010 are almost identical. The 40009 doesn't mention military time and the 40010 does, so you might want to what the manual says. 40010 manual and 40009 manual. According the 40010 manual, is says:

Displaying the12/24 hour, Date, Month and Year:
Display the 12/24 hour by hold the "+" button for 2 seconds. To display the date, month and year by press the "-" button, the year appears and then if pressed again, the month and date (eg. “12 31” means Dec 31) appears.

So maybe that will do. I have a 40010, but my manual is different from the one on the website. Its DST button and not Alarm Set button to change the time. So maybe try holding down different buttons for a couple of second see if one lets you change it between 12 and 24 hour. Good luck, hope this helps.

Mar 16, 2009 | Equity Time USA Insta-Set 44200 Clock...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Equity Time USA Audio Players & Recorders Experts

handy2011

Level 1 Expert

3 Answers

Tom Chichester

Level 3 Expert

34100 Answers

kakima

Level 3 Expert

102366 Answers

Are you an Equity Time USA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...