I restored my entire system due to a problem I was having but the backup I used was too old than my and used a different id ie [email protected] I was using [email protected]......... how do I change the live.com id to msn.com id ?????

To restore the caller ID function on your NEC Infrontia DX2ET 32 BM PABX system, you can follow these steps:

Check the configuration settings: Ensure that the caller ID feature is enabled in the system configuration settings. You may need to consult the manual or a professional to assist with this.

Check the phone lines: Make sure the phone lines are properly connected to the PABX system and are functioning properly.

Check the firmware: Make sure the firmware on your system is up to date and compatible with the caller ID feature. If not, you may need to upgrade the firmware.

Test the caller ID function: Try making a call from an outside line to the PABX system and see if the caller ID is displayed on the phone. If not, try using a different phone to see if the issue is with the phone itself.

If the above steps do not resolve the issue, it may be necessary to seek the assistance of a professional technician or a vendor who specializes in NEC Infrontia PABX systems. They will be able to diagnose and resolve the problem.

Many people confuse system back-ups with system restore and/or recovery programs. They are very different. A backup makes a copy of selected (or all) files and stores them to a disc, tape, hard drive, or other device that will allow you to protect your files in the event of data loss. Say you accidentally delete an entire directory instead of a single file. Your backup would allow you to re-load that directory. System restore/recovery files are used in the cases where you either want to reload the computer back to a certain condition (factory restore), or need to completely recover your computer in the event of a crash. These types of files usually need one of two things to work. If the recover/restore software was OEM manufacturer supplied, there may be a BIOS routine that, using a hotkey on boot-up, will allow you to access the recovery/restore file. If it is an aftermarket program like your, recovery/restore files usually need to create a bootable USB or CD/DVD that can be inserted on boot-up, and then the files on that device will perform the recovery/restore. If all you have a a system backup, you may have to reinstall the operating system, drivers, and then the backup software. After that, you can use you backup file to recover your remaining programs/data.

You can make a new Blackberry ID account. You will need a corresponding email address matching the account. If you know the account name and you have a matched email address it is possible to reset the password.

Once you have a new account you will have to re-install the operating system in the phone to be allowed to create a new account on the phone. You will not be able to restore from any backup images that were made with the old account name. The backup will restore the old account name that you cannot access.

Once you make the new account you will be starting over with the phone. You can use a synced contacts with Hotmail, or with MS Office Outlook.

You can reinstall the entire operative system with the CD that comes with your laptop, or with the restoration partition. See user's manual. This is the best way to fix error in a PC. Before restore the OS, backup your personal data.

RESET PASSWORD
JUST RESET PASSWORD by using forget password so windowslive will send u link 2 get back password

Simple test to determine if it's a hardware or software problem : try to boot in the BIOS. If you can't then it's hardware you should just return it, it's still in the warranty. If you can then Windows is totally corrupted so just reinstall it.

Do a system recovery to a date that the system was not doing this.

continously restart may be most probably due to OS file corrupt;restore for OS if you have ealier taken any backup from the backup media or try botting in the safe mode by pressing F8 during system startup;check you have your CPU fan cooling system working properly ;if none of this work the only solution is to re install the operating system;you can backup any important file beofre doing that by using any bootable cd like UBCD,acronis disk backup,or any linux live operating system.

let me know if it's helpful to you