Question about JVC KDR420 In Dash Receivers
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
its simple. hold the "sel" button until the menu comes up and it will say hours use the volume button to change it. then use the next button to go to the minutes. then you can also change other settings under this menu. hit the "sel" button again to go back.
Posted on Apr 10, 2009
Here's the wire colors for your KD-AR560:
Black = Ground (to vehicle chassis)
Yellow = Constant 12V (power)
Red = Accessory (to vehicle accessory terminal)
Blue/White = Remote turn-on lead (to remote amp)
Orange/White = Illumination (to vehicle light control switch)
Brown = Cell Phone terminal
White = Left Front Speaker positive (+)
White/Black = Left Front Speaker negative (-)
Gray = Right Front Speaker positive (+)
Gray/Black = Right Front Speaker negative (-)
Green = Left Rear Speaker positive (+)
Green/Black = Left Rear Speaker negative (-)
Violet = Right Rear Speaker positive (+)
Violet/Black = Right Rear Speaker negative (-)
Hope this helps.
Posted on Apr 24, 2009
Connect Yellow to Battery (always 12V), red to ignition, and black to ground. Disconnect all others. Check it. If the radio stays on and plays CD, then radio is good. You may check other wiring
Posted on Jan 19, 2010
Tips for a great answer:
Jan 12, 2018 | JVC Car Audio & Video
Mar 06, 2015 | JVC Car Audio & Video
Mar 02, 2013 | JVC AM FM CD DET FACE CAR STEREO
Mar 07, 2012 | JVC KD-S26
Aug 21, 2011 | JVC KDR420 In Dash Receivers
Dec 06, 2010 | 2002 Pontiac Sunfire
Dec 19, 2009 | JVC KD-G230 CD Player
Dec 06, 2008 | JVC KD-SX750 CD Player
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: