Question about Dishwashers
Most often these are power failure codes. Unplug and wait 230 minutes to clear the board of power. Replugin and try again. This resets the board like rebooting you computer.
Posted on Oct 17, 2013
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Error code LE shown on
Here is a link to the service manual for your dishwasher. Page 25 discusses the error code...
Hope that helps you resolve your problem..
Posted on Dec 13, 2008
emmanuelr is spot on with this advice. The dishwasherr had been idle for a few months so as advised disconnected and reconnected the connection to the water flow meter and job done. My friend you are a scholar and a gentleman thank you so much. You are not an apprentice to me.
Posted on Apr 06, 2010
Tips for a great answer:
Feb 18, 2017 | Siemens Dishwashers
I appreciate your post, friend!
I see that you are having an issue with your Electrolux cooktop displaying a "E07" and shutting off. An "E07" code stands for an issue with your key sensor timer and this could be a potential problem with your right, left, or center board. This may not be a simple DIY job and I would highly recommend having a professional technician come out to diagnosis your cooktop. The technician will have the appropriate tools needed for properly diagnosing your cooktop. This step will help you to avoid any unnecessary part purchases. Hopefully this information is helpful. -Matt
Feb 19, 2015 | Electrolux Cooktops
Apr 03, 2014 | Siemens Dishwashers
Oct 17, 2013 | Bosch Dishwashers
May 14, 2012 | Dishwashers
Jan 13, 2011 | Siemens Dishwashers
Feb 27, 2008 | Hobart 29 in. AM15-1 Free-Standing...
Feb 18, 2018 | Dishwashers
822 people viewed this question
Usually answered in minutes!