I NEED A YAMAHA HTR-3063 OWNERS MANUAL - Audio Players & Recorders

Hi Tyrone, I'm looking at the Yamaha HTR 3063 manual and it does not have the Tape-Monitor function, which would allow you to have the connections for an equalizer
This happens because of the variety of types of audio signals and they can not be processed for the insertion of an equalizer
Eventually, you could equalize a single signal, which you would connect to the EQ input and the EQ output, connect it to any of the RCA L-R audio inputs
Greetings Franco Dosil

Hola Tyrone, estoy viendo el manual del Yamaha HTR 3063 y no cuenta con la funci?n Tape-Monitor, la que te permitir?a tener las conexiones para un ecualizador
Esto sucede por la variedad de tipos de se?ales de audio y no se pueden procesar para la inserci?n de un ecualizador
Eventualmente, podr?as ecualizar una sola se?al, que la conectar?as en la entrada del EQ y la salida del EQ, la conectar?as alguna de las entradas de audio RCA L-R
Saludos Franco Dosil
https://usa.yamaha.com/files/download/other_assets/7/321147/HTR-3063_om_en1-1.pdf

https://data2.manualslib.com/pdf3/65/6430/642969-yamaha/htr3063.pdf?6a90cbe355c2bdc4e399d09c40d1a7ab&take=binary

it called a potenciometer find the number of it and replace just that part

The YPAO isn't on the 3063 model. only 4063 and up. If this is used and you can't get your money back, there is a firmware file here http://download.yamaha.com/search/product/?language=en&site=ca.yamaha.com&product_id=1436250 that can help get your receiver running correctly.

Yes, you can go from tha audio out jacks to the inputs of a power amp. You can go to the link below to get a copy of the manual.
http://download.yamaha.com/search/product/?site=usa.yamaha.com&language=en&category_id=16446&product_id=1098305

you might have to reset the video output. hold down the power button for 5 seconds. It should beep and the iight will flash. wait a few seconds then turn it on.

check to see what ohm your speakers are using. I know the 3063 supports both 6 and 8 ohm but it is defaulted at 8.

... in whatever manner it requires according to its manual. The Yam accepts just about anything.

http://www.retrevo.com/support/Yamaha-HTR-3063-Receivers-manual/id/23653ag915/t/2/

Hi al_sha,

Please be informed that Yamaha did not release firmware that can be downloaded by users, however they provided a step by step procedure on how to update the version of your unit. Please visit this link to have the Firmware update procedure for Yamaha HTR-3063.

Hope it helps.

Thank you for using FixYa.

You can download the manual and other documents from Yamaha here.

Are we really talking about a HTR-3063?

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Yamaha-HTR-3063-Receivers-manual/id/23653ag915/t/2/

Strangely enough, that message is NOT documented in the HTR-3063 manual, but in another Yamaha manual (HTR-5063) it means the speaker being tested is believed to be Out of Phase, meaning wired incorrectly.

Your unit (HTR-3063) doesn