Question about Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I'm assuming it's SC545. It pertains to temp not being correct in the fuser. Possibly a thermistor, thermal fuse or lamps are bad. It's one of the codes that need to be troubleshot and replace whatever is needed before clearing the code. This is to prevent further damage to the machine. Thanks Colin
Posted on Jun 29, 2009
SC490 = Main fan error
The main fan motor lock signal goes high for 5 s while the fan is on.
• Fan motor overloaded due to obstruction
• Fan connector disconnected
Posted on Aug 31, 2009
Testimonial: "thats the problem, thanks"
This is a transferbelt home position error.
1. Turn the main switch off and on.
2. Reset the transfer belt unit.
3. Clean or replace the transfer belt
4. Replace the transfer belt contact
5. Check the contact and release
mechanism of the transfer belt unit.
My guess is cleaning will solve it.
open the front door and sing don the green lever
locate the 2 screws at the top and bottom of the unit and remove them.
remove the cleaning unit 1 screw and a thmb lever slide the unit out (its on rails) wipevacum and/or blow clean the unit and re assemble
also clean the connector that it plugs to in the back of the machine
if it still appears belt or unit will need to be replaced
Posted on Apr 06, 2010
On the CL7200, sc440-02 is a color drum motor error. This error could be caused by a bad color drum unit (any of the 3 colors) or the drum gear positioning sensor, but more often than not it is because of a drum motor that went bad. There is one motor that controls all three color drums -- when this motor goes bad, you get the sc440-02 error.
Posted on May 31, 2010
Tips for a great answer:
Feb 22, 2011 | Ricoh Aficio CL7200 Laser Printer
Dec 29, 2010 | Ricoh Aficio CL7200 Laser Printer
Nov 23, 2010 | Ricoh Aficio CL7200 Laser Printer
Sep 10, 2010 | Ricoh Aficio CL7200 Laser Printer
Jan 26, 2010 | Ricoh Aficio CL7200 Laser Printer
Sep 17, 2009 | Ricoh Office Equipment & Supplies
Aug 31, 2009 | Office Equipment & Supplies
Jun 28, 2009 | Ricoh Office Equipment & Supplies
Jan 22, 2009 | Ricoh Aficio CL7200 Laser Printer
28 people viewed this question
Usually answered in minutes!