Firmware yukai 580 - Mustek R580 DVD Recorder

1/2. 580 divided by 290 is 2.

This means that the battery is unable to hold a charge any longer. THe only option in this case is to replace the rechargeable battery for your Yukai 700. A battery has a charge life meaning you can only charge it for a set number of times. It seems that it has already exceeded that.

Managed to find this blurb...
"The KX - 580SE is a refined model of the popular KX - 580, three time winner of ''What Hi Fi? Best Cassette Deck Award''. The KX - 580SE is a special edition which is UK specified. This cassette deck features CD to tape synchronized record start, timer record / play, new audiophile components in both the dolby and audio output stages, two - motor stable transport, Dolby HX pro dynamic bias servo, auto tape tuning and improved power supply."

Craig Electronics has uploaded a new firmware update to their website that will correct this issue along with other small bugs that the 4.1 firmware had. The 4.2 update makes the device run a lot smoother and provides a better Android experience.

http://www.craigelectronics.com/site/pdetails.php?id=580 < This is the link to the website. You must follow the installation guide this will require a SD Card to complete. Craig Electronics Inc

The royal Alpha 580 operating and programming manual is here:http://the-checkout-tech.com/manuals/cashregisters/Royal_Alpha-580_instruction_programming_manual.html

Same happened to me. I called the support number in the manual 580-272-0035, and they gave me the reason and the fix. The reason is improperly disconnecting the device from a USB port. This can cause the firmware to be corrupted. The solution is to allow the battery to completely drain, then before connecting to any power source, press the play button for 30 seconds. This resets the firmware. How to properly disconnect from a USB port is on page 17 of the manual and applies to any device.

No it's not the battery power: your nuvi has suffered the firmware equivalent of a stroke.

These are the steps to take to update your Nuvi 200:

Download and then run Garmin 200 WebUpdater to replace its firmware / system software.

I hope that helps.
_____________________________
Nuvi 200 Manuals here.
Backup your favorites.
Nuvi 200 Hard Reset.

This happened to me too. Just unscrew the 4 screws, lift out the hard drive and glue it back down to where it was (2 little pegs will fit into two little holes on the circuit board. You can touch the contacts with a thin tipped soldering iron if you want to but you probably don't need to.Then close it up. That worked for me!

you have to chanche an option on your pvr to ty output

you can try downloading a data recovery program and you just may be able to get the software back try easy recovery