Question about Televison & Video

Open Question

Need code for TR-40 CRA Dish Network Converter Box

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 374 Answers

SOURCE: need codes for a phillips magnavox for dish network controller

Follow this link and got to the remote section. Once there shoose the type of remote you have and select remote codes to get the ones for that particular remote that may operate the piece of equipment desired. I hope this is of assistance to yoiu and thanks for using Fix Ya. Please let me know if I can be of further assistance.
Jim

Posted on Nov 11, 2008

  • 247 Answers

SOURCE: programming a hitachi remote to a dish network box

i would try to reprogrsam the remote first. do yuo have the owners manual to do this?

Posted on Dec 18, 2008

stonephoenix
  • 563 Answers

SOURCE: can I program my dish network remote for a rca

Try the RCA codes listed in the code book that came with your Dish remote. You will want to use the "AUX" button at the top of the dish remote. You will likely NOT get full functionality if it works at all, however, there is a chance you'll be able to change the channels and power the converter box on and off.

If the codes you have are segregated into categories of different devices, i.e. TVs, DVD players, etc. You probably will not be successful.

Also, there should be instructions in the remote manual that will tell you how to search all codes that are stored in the Dish remote.

While this may not solve your problem, I hope I've given you helpful information that will allow you to make an informed decision as to where to go from here.

Let me know if I can be of further assistance.

Posted on May 20, 2009

  • 374 Answers

SOURCE: need sharp tv codes

The codes for a Sharp are 526, 585, 591, 605, 606, 607, 608, 628, 629. Thanks for using Fix Ya.

Posted on Aug 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a dish tr-40 converter box with no remote control. Can I use my dish remote for that to?


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

Dec 01, 2016 | Televison & Video

1 Answer

I want to program my Magnavox TB110MW9DTV Digital analog converter box to the aux button on my Dish network 4.0 IR/UHF PRO remote. I can't find a code to program this. I have talked with Dish and I have...


Hey there, Cheri Torres with DISH Network Customer Service here. We unfortunately do not have any codes for our DISH network remote controls that will program a Magnavox digital converter box. An option you can try is a power scan which will basically find the code for you in some cases. I will list here for you the instructions for addressing your DISH remote to your converter box. I hope you find these instructions helpful and if you have any other questions feel free to post back here and I would be happy to help.

Instructions for performing a power scan
  1. With the desired equipment on, press and hold the AUX Mode button until all mode button back lights illuminate, then release.
  2. Press and release the # 2 then the STAR (*) button.
  3. Press and release the Power button.
  4. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
  5. Press the POUND (#) button as soon as the desired equipment powers off. Note: If the code entered is valid for the remote, the mode light flashes three times.

Apr 09, 2011 | DISH Network IR Remote Control

2 Answers

I am trying to program my DishTV universal remote to control my Apex DT250A digital tv converter and i cannot find a code that will work. Do you know the correct code to enter into my DishTV remote. Thanks...


Hello this is Nick Franta from DISH. There are a couple of codes you can try. The following link will provide the available codes we have. You would need to hold the SAT button down until the top 4 buttons light up, enter the code, then #. The SAT button should flash 3 times when the code is successful.

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

Let us know if you need further assistance!

Jan 17, 2011 | DISH Network IR Remote Control

1 Answer

I have an LG 42LG70 42 in. HDTV LCD TV. Whenever I have my brightness setting below 40, my Dish DVR will no longer respond to its Dish issued remote control. If I turn the brightness anywhere above 40,...


Tries unplug,replug the DVR box an hour later.The box should reset itself and update it software.The box should work normal again.Not,call Dish Network to replaced the box,have intermittent problems.

Aug 26, 2010 | DISH Network ViP722 DTV Receiver /...

1 Answer

Have to manually turn on tv when turning on digital converter box


astoner3,

Our dish remotes are compatible with most TV manufacturers. On some older TV, we may not have codes that allow for full functionality for the DISH remote. I have provided the most common codes to work with the Sharp TV. The codes are: 628, 605, 740, 591, and 606. I have also provided instructions on programming the remote to the TV.

Remotes: Basic (Television Only)
  1. Turn the Television On
  2. Press and Hold the TV Power button for three seconds until the LED flashes
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press OK. Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Ray Calo
DISH Network

May 15, 2010 | DISH Network EZ Remote Remote Control

1 Answer

Does the JVC AV27230 require a digital to analog converter?


if you are going to continue using the rooftop antenna, then you will nee to purchase a digital converter box. Those television sets are only analog. You do have an option to get Directv or Dish network and you will not need a converter box at all. Directv and Dish network are 100% Digital and the receivers work as converter boxes for that product only.

Jun 16, 2009 | JVC AV-27230 27" TV

1 Answer

Can I program my dish network remote for a rca


Try the RCA codes listed in the code book that came with your Dish remote. You will want to use the "AUX" button at the top of the dish remote. You will likely NOT get full functionality if it works at all, however, there is a chance you'll be able to change the channels and power the converter box on and off.

If the codes you have are segregated into categories of different devices, i.e. TVs, DVD players, etc. You probably will not be successful.

Also, there should be instructions in the remote manual that will tell you how to search all codes that are stored in the Dish remote.

While this may not solve your problem, I hope I've given you helpful information that will allow you to make an informed decision as to where to go from here.

Let me know if I can be of further assistance.

May 18, 2009 | Televison & Video

1 Answer

I need the code for my old satelite remote to work the t.v.


The Sceptre 40* I have uses Sony codes.
There are 500, 514, 521, 578, 609, 619, 622, 629, 690

I have an old remote and an old converter box, not HD, and the 500 code only turned it on and off, but the 619 code enabled volume control, mute, changing over-the-air channels, maybe more, but the menu button did not bring up the TV (as was true with the previous TV) . Good enough, but not 100%.

Apr 26, 2009 | Televison & Video

1 Answer

RC 201 POLAROID TO WORH DISHNET


Try calling the Dish network customer support phone number. Only they can tell you the code for the remote you have, that matches the box you have.

If you have the manual for the poloroid it should tell you if the Polaroid is a universal remote and show codes in the manual. If no codes in the Polaroid manual then it is not a universal, so it can not be done.

Mar 23, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5105 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...