Question about Fisher and Paykel Dishwashers

Open Question

Fisher pykle dishwasher dw60c1 has 1,3 and 4 lights flashing and not draining, also a series of beeping. What is the prob how do we fix please.

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

RescueTech
  • 145 Answers

SOURCE: my fisher pykle dishwasher

F1 is a flood code. There are several reasons this could be happening. One, make sure that you are not putting dishes in that are too tall for the drawer and possibly keeping the lid from closing all the way.
Also, on those models, there is a device behind the drawer that guides the hoses and wiring as you open and close the drawer. On older models, this link support was made of nylon and would crack and break loose over time. Then the broken end gets jammed under the back of the lid the next time it is used.
Since the machine is now "wet" it will not stop doing the F! and you should hear the sound of both drain pumps running. The machine is trying to drain itself and it will not allow any other input. It needs to be serviced. Other techs will give bad advice about "just take out the lower drawer and dry up the flood sensor"
Avoid this advice like the plague. There's a reason it got wet and that needs to be determined. There is a diagnostics procedure to make sure the lid motors are operational. This machine should only be serviced by a properly trained Fisher Paykel tech, as many independent techs fancy themselves as Fisher Paykel techs and they know enough to be dangerous...

Posted on Dec 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haier dishwasher HDW9WHT beeps 5 times and won't wash what is wrong with it can I fix it or should I get someone in


7 results (0.54 seconds) Search Results

    Haier HDW100WH / HDW100SS - ProductReview.com.au

    www.productreview.com.au > ... > Dishwashers > Freestanding > Haier

    Rating: 1.7 - ‎30 votes
    Haier HDW100WH / HDW100SS: 30 customer reviews on Australia's largest ... 1.7 out of 5 stars for Haier HDW100WH / HDW100SS in Freestanding Dishwashers. ... I putthis review in to do my part for what I think is a great consumer service you ... it it keeps beeping 10 times telling me doors open??and won't begin cycle.

    Haier Dishwasher Error Fault Codes - Lights Flashing ...

    removeandreplace.com/.../haier-dishwasher-error-fault-codes-lights-flash...
    Dec 21, 2015 - Haier dishwasher error codes - flashing lights - beeping ...Dishwasher keep filling water and draining at the same time ... Fix Washing Machine That Won't Drain - Washer Not Draining Water .... 2015; Samsung Galaxy Note 5 Quick Users Guide September 25, 2015; My Freezer Is Cold But The Refrigerator ...

    Dishwasher Has Beeping Sounds Blinking Lights - How To ...

    removeandreplace.com/.../dishwasher-has-beeping-sounds-blinking-light...
    Dec 21, 2015 - At times your dishwasher may need to be reset. ... Haier DishwasherError Fault Codes - Lights Flashing Beeping Sounds My Haier ... Fix WashingMachine That Won't Drain - Washer Not Draining Water .... 2015; Samsung Galaxy Note5 Quick Users Guide September 25, 2015; My Freezer Is Cold But The ...

    How to Troubleshoot & Repair a Dishwasher ' HomeTips

    www.hometips.com/repair-fix/dishwasher.html

Jan 19, 2016 | Haier Dishwashers

1 Answer

Dishwasher stops after filling with water


there is a problem with the drain. It is not draining all the water.
1. The drain hose could be too high.
2. There is a plugged pipe
3. There is debris in the drain hose or the pump

May 31, 2013 | Fisher and Paykel Dishwashers

1 Answer

We have the double dish drawers....the lower dishwasher begins its cycle and then suddenly starts beeping with the red lights flashing....also the water is not draining. can you tell us what's going on?


It is important to find out which light is flashing - if you have an LCD display then is there any character like Fxx or Uxx on it.
Which LEDs on the drawer door lid top are on. If water is not draining then it is linked to the rotor pump or drain sump being blocked.

Nov 12, 2010 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Hi, My washing machine, Fisher and Paykel, MW 511 PRIDE would not do the SPIN cycles. Please advise. Thanks. Sam Lee


Hi Sam Lee.Now , does the machine drain the water?If it does drain the water does it stop and beep and show an error code?if it does the error code will be a series of lights that will light up when the machine is beeping.They will be on a row of 8 lights.Starting from left to right which lights are lit when the machine beeps,Is it the 2nd and 4th or the 3rd and 7th ---etc---?Please reply with additional information on the questions and I am sure I can help you.Looking forward to your reply.

Sep 03, 2010 | Fisher and Paykel Washing Machines

1 Answer

Top draw beeping delay and water not draining


Not sure what you mean by beeping "delay" I am not sure if there is any such light on the dishwasher. The HRS DELAY is displayed on the LCD when dishwasher has been set in delayed start mode. Are you seeing this flashing in an orange background? There could be several reasons for water not draining. Does the beeping go away if you press the power on/off button? Also does the delay flashing stop. Have you checked to see nothing is blocking the drain pump which is the same rotor that drives the washer arms.. What about the kitchen down pipe - is it clear? If you think you have to take the drawers out to reach the drain hose then follow instructions on page 7 step 2 of the installation manual. It is for a later model but your one should be similar. Make sure you turn the mains power off when working inside the dishwasher.

Jul 06, 2010 | Fisher and Paykel 24 in. DD-602 Built-in...

2 Answers

I have bought a fisher and paykel model DW60CSX1 second hand... i have connected all the relevant pipes and taps, the washer gets to a point in the cycle where it stops and thw 1st, 2nd and 4th lights...


My manual says that this means the drain hose is crimped or bent, or the drain hose is too high. In other words, the drain can't drain for some reason.

Dec 13, 2009 | Fisher Dishwashers

2 Answers

Hi Both drawers show error F1 flashing beeping with rinse light on and both pumps run after power is applied to machine


F1 error indicates flood switch in base has activated, meaning machine has leaked. This causes machine to drain continously, and can only be stopped by switching off power. Not easy to fix if you don't have experience- bottom drawer has to be removed to access flood switch, then machine needs to be test run and checked for leaks. Best to call the professionals!!

Oct 03, 2009 | Fisher and Paykel 23 in. DD603H SS...

1 Answer

My fisher pykle dishwasher


F1 is a flood code. There are several reasons this could be happening. One, make sure that you are not putting dishes in that are too tall for the drawer and possibly keeping the lid from closing all the way.
Also, on those models, there is a device behind the drawer that guides the hoses and wiring as you open and close the drawer. On older models, this link support was made of nylon and would crack and break loose over time. Then the broken end gets jammed under the back of the lid the next time it is used.
Since the machine is now "wet" it will not stop doing the F! and you should hear the sound of both drain pumps running. The machine is trying to drain itself and it will not allow any other input. It needs to be serviced. Other techs will give bad advice about "just take out the lower drawer and dry up the flood sensor"
Avoid this advice like the plague. There's a reason it got wet and that needs to be determined. There is a diagnostics procedure to make sure the lid motors are operational. This machine should only be serviced by a properly trained Fisher Paykel tech, as many independent techs fancy themselves as Fisher Paykel techs and they know enough to be dangerous...

Dec 06, 2008 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

Fisher Paykel F1 error / double dishwasher drawer


F1-water on bottom of dishwasher. Uselly it cost by broken drain hose. Need expert tech to fix the problem.

Dec 01, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Dishwasher not working


dishwasher dwd 3410 w,it runs normal to the end but doesnt drain the water

Mar 25, 2008 | Beko 24 in. D3421F Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Brian Coughlan

Level 2 Expert

275 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...