Question about Health & Beauty

Open Question

Zenith weight scale -err-h

Scale will read weight, but shows ERR-H after. No body fat% or fluid # given. Thanks for your help.

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Err 1 message on Taylor Lithium Elec Scale model 7346

This is a reply I received from Taylor customer support. I have followed this procedure enough times to wear out the original battery and still get the Err 1 message. You may have better luck.

Thank you for your e-mail. The reboot below may clear the error from
your scale. You may need to do this several times to completely reboot
the system. Please let us know if you have any questions or continue to
display the Error.


1. Remove the battery from the scale
2. Set the scale on the floor without the battery in place.
3. Stand on the scale for 10 seconds (still without the battery)
4. Carefully replace the battery without turning the scale on.
5. Using only one foot, tap the scale or apply just enough pressure to
turn on the display. (It should show dashes or zero's) IMMEDIATELY
REMOVE YOUR FOOT.
6. Let the scale turn off
7. Step on the scale for a weight reading


Regards,


Linda DLT
Consumer Relations
Taylor Precision Products
& Salter Housewares
2220 Entrada del Sol, Suite A
Las Cruces, NM 88001
Toll free - 800-289-0944
866-843-3905
Direct - 575-526-0944 ext 3172

Posted on Jun 24, 2009

Ad
  • 1 Answer

SOURCE: HealthSmart bathroom scale displays "Err"

Put scale in round file can. Buy another cheap scale.

Posted on Oct 05, 2009

Testimonial: "The new scale works great and was on sale at Wal-mart for only $29."

  • 39 Answers

SOURCE: I have a Taylor body fat analyzer and scale model

From the Taylor Site http://www.taylorusa.com/faq-scales

Here are the basic ERR messages and their meanings:

  • Error 0: Initialization
  • Error 1: Instability (scale is on an uneven surface ex: carpet)
  • Error 2: Unit may have been jarred or unit was overloaded (customer went over the maximum weight capacity)
  • Error 3: Contact error (Feet were not wet for Body fat reading, feet aren’t big enough to reach sensors)
  • Error 4: Body fat is out of range
  • Error 5: Water is out of range
I got an ERR2 message and now the scale doesn’t work. What should I do? The following reset procedure is used when the scale shows an err2, err, 0.0, inaccurate weight, or some other unusual error.
  1. Remove the battery from the scale.
  2. Sit the scale on a hard surface floor.
  3. Step up onto the scale, stand still for about 5 seconds and step off the scale.
  4. Re-install your battery.
  5. Place the scale back on a hard surface floor.
  6. With one foot only, place just enough weight on the scale for the display shows zero’s or dashes. Once you see zeros or dashes remove your foot.
  7. Wait for the scale to turn off again.
  8. Step up onto the scale for a weight.
If the reset is successful, you should receive a weight right away. If you continue to receive one of the error messages above please call our Customer Service department or contact us via email. You can also try the reset procedure a 2nd time. Sometimes the reset procedure will work the second time.

Posted on Jan 21, 2010

  • 1 Answer

SOURCE: need instructions on how to reset to show weight

change kg to lbs on Tanita

Posted on Jul 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Scale shows time but will not show weight, shows Err


Go buy a new scale. That one is toast.

Dec 29, 2015 | Health & Beauty

1 Answer

I keep getting Err after replacing battery


my scale keeps reading err when I step on it

Jun 01, 2014 | Homedics Digital Scale

1 Answer

On my escali bfbw200 scale it says err 2


First be sure that you are bare foot when using the scale. If you are not making contact with the metal sensors on the scale's platform the scale will read Err 2. The way the scale is able to measure your body fat and body water % is by sending a small, unnoticeable electronic signal through your body. Also, be sure the scale is on a flat, stable, hard surface while in use.

If you are bare foot while using the scale, and you are still receiving an Err 2 message, please fill out the form at this link (http://www.escali.com/index.php?p=warranty) and one of our customer service reps will contact you within approx. 24 hrs with instructions on a fix or replacement.

Questions, contact @escaliscales on twitter or call 1-800-467-6408.

Thank you for choosing an Escali Scale!


Noah Harber, Brand Manager at Escali Scales

May 26, 2012 | Escali BFBW200 Body Fat/Water Bath Scale

1 Answer

My WW78 scale keeps giving an ERR message when I stand on it.


Usually I change the weight by weighing one foot and then weighing again with both. And then I keep repeating that until my results are consistent. Then that result seems to be accurate

Feb 19, 2012 | Conair Weight Watchers® WW78 by Glass...

1 Answer

Error 2 . How can we solve this problem. Thank you, Margaret


I found this procedure which was given by Taran_2005. I just come to try him(it) on mine, that works.

"The following reset procedure is used when the scale shows an err2, err, 0.0, inaccurate weight, or some other unusual error.
  1. Remove the battery from the scale.
  2. Sit the scale on a hard surface floor.
  3. Step up onto the scale, stand still for about 5 seconds and step off the scale.
  4. Re-install your battery.
  5. Place the scale back on a hard surface floor.
  6. With one foot only, place just enough weight on the scale for the display shows zero's or dashes. Once you see zeros or dashes remove your foot.
  7. Wait for the scale to turn off again.
  8. Step up onto the scale for a weight.
If the reset is successful, you should receive a weight right away."

Sep 10, 2011 | Terraillon FBC Alteo Family Body Control...

1 Answer

I have a Taylor body fat analyzer and scale model #5563 that keeps showing Err 2. It won't read any weight whatsoever... it just goes stratight to the Error message. Do you know what that means and how I...


From the Taylor Site http://www.taylorusa.com/faq-scales

Here are the basic ERR messages and their meanings:
  • Error 0: Initialization
  • Error 1: Instability (scale is on an uneven surface ex: carpet)
  • Error 2: Unit may have been jarred or unit was overloaded (customer went over the maximum weight capacity)
  • Error 3: Contact error (Feet were not wet for Body fat reading, feet aren’t big enough to reach sensors)
  • Error 4: Body fat is out of range
  • Error 5: Water is out of range
I got an ERR2 message and now the scale doesn’t work. What should I do? The following reset procedure is used when the scale shows an err2, err, 0.0, inaccurate weight, or some other unusual error.
  1. Remove the battery from the scale.
  2. Sit the scale on a hard surface floor.
  3. Step up onto the scale, stand still for about 5 seconds and step off the scale.
  4. Re-install your battery.
  5. Place the scale back on a hard surface floor.
  6. With one foot only, place just enough weight on the scale for the display shows zero’s or dashes. Once you see zeros or dashes remove your foot.
  7. Wait for the scale to turn off again.
  8. Step up onto the scale for a weight.
If the reset is successful, you should receive a weight right away. If you continue to receive one of the error messages above please call our Customer Service department or contact us via email. You can also try the reset procedure a 2nd time. Sometimes the reset procedure will work the second time.

Jan 15, 2010 | Health & Beauty

1 Answer

Nothing will display on the read out


The following reset procedure is used when the scale shows an err2, err, 0.0, inaccurate weight, or some other unusual error.
  1. Remove the battery from the scale.
  2. Sit the scale on a hard surface floor.
  3. Step up onto the scale, stand still for about 5 seconds and step off the scale.
  4. Re-install your battery.
  5. Place the scale back on a hard surface floor.
  6. With one foot only, place just enough weight on the scale for the display shows zero’s or dashes. Once you see zeros or dashes remove your foot.
  7. Wait for the scale to turn off again.
  8. Step up onto the scale for a weight.
If the reset is successful, you should receive a weight right away. If you continue to receive one of the error messages above please call our Customer Service department or contact us via email. You can also try the reset procedure a 2nd time. Sometimes the reset procedure will work the second time.

Jan 03, 2010 | Taylor Dgtl Body Fat Scale

1 Answer

HealthSmart bathroom scale displays "Err"


Put scale in round file can. Buy another cheap scale.

Oct 03, 2009 | Dmm Elscale Healthsmart Glass Electronic...

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

wcdoc1953
wcdoc1953

Level 2 Expert

278 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...