Question about Uniden BC250D Handheld Scanner

Open Question

I want the air band on my Uniden Bearcat UBC60XLT-2 can it be modified to get the air band.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Mechanic688
  • 204 Answers

SOURCE: i need to know how to program channels into it

HI again, the 248 is only a 50 channel, do you need this info for the 860? If so, I answered in your other post, but here it is again.

Hi tina33, I have an 860 scanner,and this is how I do it. If there is no freq's in there yet, start on channel 1 and punch in the freq- hit E and it will enter it into the first channel. Hit manual to go to ch 2 and repeat. If you need freq's for your area, go here and search out your state and county and it'll give you a list of freq's for your county.You do not have to add the weather channels as their in there already, just hit the weather button. I use an external antenna on mine as it extends the range and allows me to pick up the cars as well.
http://www.radioreference.com/apps/db/
If you need a book for your scanner, you can get one here, just print1.gif it out.
http://www.uniden.com/pdf/BC860XLTom.pdf

Hope this helps,, Mechanic

Posted on Jan 23, 2008

Mechanic688
  • 204 Answers

SOURCE: Radio scanner manual

Will, Don't know if your still needing a manual for your scanner but here is a like that will get you what you need.
http://www.uniden.com/pdf/BC60XLTom.pdf

Hope this helps you,,, Mechanic

Posted on Jan 24, 2008

  • 1 Answer

SOURCE: UBC60XLT Uniden Bearcat hand held Scanner

Try pressing scan & holding L/O for 10 secs. That is suposed to unlock all freqs

Posted on Mar 18, 2009

  • 211 Answers

SOURCE: i have an uniden bearcat 30channel 10 band

For some unknown reason, Uniden assigned a very similar model number to two very different scanners. The 30 channel scanner you have is a BC60XLT-1, where the 10 channel version is a BC60XLT.

The manual for the BC60XLT-1 can be found at this link:
http://www.uniden.com/pdf/BC60XLT-1om.pdf

Posted on Feb 25, 2010

  • 1274 Answers

SOURCE: uniden scanner UBC60XLT my issue is that low is apearing

Press manual,channel up-down,when you see the L/O, press the L/O, you may have to flip the switch in the back,some of your frequency,s have been locked out,this process re-enters that frequency. ...hope this helps....

Posted on Mar 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do program my bearcat BC860 XLT (put frequencies back in)


Try this link to the actual manual; http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/BC860XLTom.pdf

Sep 26, 2014 | Uniden "Bearcat 100 Channel 11 Band...

2 Answers

Why can't i listen to aircraft pilots & tower on my Uniden bearcat BC60XLT-1? Our airband frequency here is 108-137 mhz.


Your scanner does not receive frequencies between 54 and 137 MHz, and there's nothing you can do to enable reception in that block. Your only option is to purchase a scanner with air band coverage. Here are the reception ranges of the BC-60XLT-1:

29.0-29.7 MHz 10 Meter Amateur Band
29.7-50 MHz VHF Low Band
50-54 MHz 6 Meter Amateur Band
137-144 MHz Military Land Mobile
144-148 MHz 2 Meter Amateur Band
148-174 MHz VHF High Band
Above bands in 5 kHz steps
406-420 MHz Federal Government
420-450 MHz 70 cm Amateur Band
450-470 MHz UHF Standard Band
470-512 MHz UHF "T" Band
Above bands in 12.5 kHz steps

Need the manual for your scanner? You can download and print it, at no cost, here:
http://www.uniden.com/pdf/BC60XLT-1om.pdf

Bill B.
Listening in since the 60's

Feb 26, 2011 | Uniden Radio Communications

2 Answers

I have a uniden bearcat scanner 30 channel i would like to know if it is possable to add any software or chip to make it able to pick up aircraft frequencies ? ...


Sorry, but it's been a long time since scanners could be modified to extend or change their frequency coverage. The AIR band in your BC350C allows you to monitor commercial, private, and some military aircraft. If you want full military air coverage though, I suggest that you look at the reasonably-priced BC370CRS.

Bill B.
Listening in since the 60's

Jan 29, 2011 | Uniden BC350C Base Scanner

1 Answer

I can not receive any channels with my uniden bearcat ubc60xlt.i have heard that police,etc have went to tetra?unsure how to receive these.please help.


TETRA is a relatively new trunked radio system that is coming into wide use in Europe. It uses digital technology unlike "standard" trunked systems, and there are no scanners available that allow monitoring of TETRA systems. For more information on this technology, there's a pretty good article you can read here: http://www.radio-electronics.com/info/cellulartelecomms/private-mobile-radio/tetra/what-is-tetra-radios-communications.php

Bill B.
Listening in since the 60's

Jan 21, 2011 | Uniden BC60XLT-1 Handheld Scanner

1 Answer

Uniden Bearcat bc560xlt scanner What radio bands (frequencies) will this radio monitor?


The BC560XLT is a basic 16-channel scanner that covers 29-54, 136-174, and 406-512 MHz. For information on the users of these bands, and complete information on using this scanner, you can download and print the operating manual here:

http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC560XLT%20%28Manual%29.pdf

For a comprehensive database of the frequencies and systems in use in your area, visit:

www.RadioReference.com

Bill B

Sep 17, 2010 | Uniden Radio Communications

1 Answer

I have a older uniden bearcat BC860XLT and dont no how to program


Programming steps and many other questions can be answered in the scanner's operating manual, which can be downloaded/printed here:

http://www.uniden.com/pdf/BC860XLTom.pdf

Bill B

Feb 16, 2010 | Car Audio & Video

2 Answers

Radio scanner manual


Here is a direct link to the pdf format owners manual for our scanner:

http://www.uniden.com/pdf/BC60XLT-1om.pdf

Dean
Rollin CBs

Dec 25, 2007 | Radio Communications

1 Answer

Radio scanner manual


Will, Don't know if your still needing a manual for your scanner but here is a like that will get you what you need.
http://www.uniden.com/pdf/BC60XLTom.pdf

Hope this helps you,,, Mechanic

Nov 24, 2007 | Uniden BC60XLT-1 Handheld Scanner

Not finding what you are looking for?
Uniden BC250D Handheld Scanner Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Jason

Level 2 Expert

211 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

509 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...