Question about Canon IP4950 Pixma Printer
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: error 6A80
Error 6A80 indicates that "an error occurred in the APP motor
during purging operation". Either the sheet feed unit, purge unit, or logic board could be at fault.
I'd recommend bringing the unit into your local canon authorized service facility for complete diagnostic and repair.
Posted on May 28, 2009
SOURCE: Service Error 6A80
That error says there is something jammed in either the purge assembly or the sheet feeder on the back not able to turn. The purge assembly is on the right where the printhead parks for cleaning.
Posted on Oct 29, 2009
Here is the solution.
I am going to describe 4 buttons on your printer. Then, I will tell you what to do with these buttons to resolve this error.
1. Look for the Black & White selection button (large white button w/ black diamond on it).
2. Look for small pink button (bottom left corner of your printer control panel).
3. Look for the OK button (big button in middle).
4. Look for the On/Off button (top left).
OK - here we go. With the printer turned off, do this:
1. Using four fingers, one on each of the four buttons, press them all and hold them down for 10 seconds.
2. Release the On/Off button - but keep holding the other 3.
3. After a few more seconds the printer will turn on. When it does this, you can release the other three buttons.
So, to summarize, you press all 4 buttons for 10 seconds, release the power button and wait for the printer to turn on. After it is on, let go the other 3.
Your error message should go away. If you don't hold the buttons all down simultaneously, the printer could go into Fax mode; just turn it off and try again.
Posted on Dec 29, 2009
That error says there might be paper scraps stopping the purge assembly on the right where the printhead parks, or something fallen into the slot where paper goes stopping the paper feed assembly. You just have to inspect closely with a flashlight before taking to the shop.
Posted on Jan 05, 2010
Tips for a great answer:
Sep 23, 2011 | Canon PIXMA iP3600 Photo Printer
Aug 11, 2011 | Canon PIXMA MP620 All-In-One InkJet...
Nov 15, 2010 | Canon iP4700 InkJet Photo Printer
May 31, 2010 | Canon MF8180C Color Laser MFC Printer
May 24, 2010 | Canon PIXMA MX700 All-In-One InkJet...
Nov 23, 2009 | Office Equipment & Supplies
Sep 21, 2009 | Canon MX700 Office All-In-One InkJet...
Aug 08, 2009 | Canon PIXMA MX700 All-In-One InkJet...
May 22, 2009 | Canon PIXMA MX700 All-In-One InkJet...
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: