Question about Panasonic Videoprojector PT-LM1E Multimedia Projector

1 Answer

Error in panasonic lcd projector/projecteur lcd model no PT-LM1E-C


Posted by on

1 Answer

Re: error in panasonic lcd projector/projecteur lcd model no PT-LM1E-C - Panasonic Videoprojector PT-LM1E Multimedia...


Posted on Jun 08, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Lamp not firing but sound works

If all other parts of the projector seem to be working, but no light come from your projector. It may be time to replace the bulb in your machine. There may be other issues with your projector but more often than not, it is time to replace the bulb.

Here's a helpful guide :

Mar 12, 2014 | ViewSonic Pro8200 Projector

2 Answers

Red power, blinking red temp


if the Lamp error and Temperature error lights are flashing red this means that there are two separate errors.

  • A flashing lamp light means the lamp failed to ignite. It could be a lamp driver problem or lamp failure. Replace the lamp to resolve the issue. If the issue is not resolved, then service the projector.
  • A flashing Temperature light signals a fan error. Turn the projector off and allow it to cool down. If the light is still flashing after the projector is turned back on, service the projector.

Feb 25, 2008 | Hitachi CP-X250 Multimedia Projector

1 Answer

DMD error code

the DMD is good ,
the Projector will still start up,even if the DMD is defective.
the lamp ballast or the mother board is defective

Feb 20, 2014 | Vivitek H1080FD DLP Projector

1 Answer

The projector came on for about 10 minutes and then shut off

Welcome to FixYa.

The projector could be overheating or the lamp has reached its end of life.

1. Clean or replace the air filter. 2. Check the lamp run time. If the lamp time has reached its end of life, replace the lamp.

Use the manual to do the above steps. Keep me posted.


Aug 03, 2011 | Radio Shack Cinego D-1000 Multimedia...

1 Answer

The bulb is not bad, the bulb replacement light is not lit and the bulb appears fine- the green light goes on then off right after you start the projector ---no heat off the back of the unit when starting...

If you have the replaced lamp with you it will be good to place it back again to see the indication to change off.
If so then the bulb must be good but if the same situation comes on then it might be the lamp.
please cross check the power supply for any errors to switch on or low power to the lamp

Sep 29, 2010 | Sanyo PLV 70 Multimedia Projector

1 Answer

Projector shuts off within 30 seconds of power on

is the led lit on the top of the projector? what colors?

green is ok.

red flashing in sequence:
2 times- lamp hours exceed 200 hrs. replace lamp.
3 times- lamp failure. replace lamp.
4 times- fans not working. remove obstruction or replace fan.
5 times- temp too high. clean thoroughly.
solid red- undiagnosed error by projector. possible power supply or ballast.

also make sure the lamp door switch is working.

Aug 07, 2009 | InFocus LP 820 Multimedia Projector

1 Answer

The projector is starting up but after warming up it shuts itself off. It is not the a problem with the filter, lamp seating or an overheating issue.

Does the lamp actually light up and project? If not, it's probably a dead bulb. Are there any flashing lights that might be displaying an error code? How dow you know it's not overheating? Remove the filter and give it a good cleaning. Some projectors measure airflow and, even though the heat hasn't built up, the projector shuts down because it predicts overheating will occur due to insufficient airflow.

Aug 04, 2009 | Sharp Notevision XG-P20XU Multimedia...

1 Answer

Panasonic projector keeps shutting off

5 minute fix guaranteed

worked for me

Apr 05, 2009 | Panasonic PT-AX100U-EC DLP Projector

2 Answers



Please clean the filters for the air and the air circulation path for cooling the lamp.

This will definitely work, pls also check that the condition of lamp is okay or not as sometimes lamp goes with the ballast unit of the lamp and that damages the new lamp.


Nov 06, 2007 | Dell 1100MP Multimedia Projector

Not finding what you are looking for?
Panasonic Videoprojector PT-LM1E Multimedia Projector Logo

Related Topics:

775 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Multimedia Projectors Experts


Level 3 Expert

2236 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers

Are you a Panasonic Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides