Question about NorStar Meridian M7310 Phone

1 Answer

How to program the page button - NorStar Meridian M7310 Phone

Posted by on

  • Melissa Oct 18, 2013

    Also note that when i attempted feature *3 and I press the "page" button the screen reads "not in service"...

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 244 Answers

Can you please be a little more specific? Are you referring to assigning the paging feature to a button on the phone or programming the actions the system performs when you press the existing paging button on the phone? Normally, when you press the predefined paging button on this phone the system prompts you to select where your paging output goes. Depending on how your system was set up it may ask you to select "set", meaning when you select this soft-key the system will sound a short alert tone through all of the speakers in all of the phones connected to the system then allow you to talk through all of the phone set speakers. The other option is to select a soft-key that directs the output of the paging to an external PA system that is connected to the NAM through a punchblock connection. You can usually also select "both" which directs the output through the phone sets and the PA system. I am not certain what, if any system programming might be involved - I am fairly certain that if your system has not been connected to a PA system the paging function is just available to output through the phone set speakers. If your phones have no buttons assigned to the page feature then you'll need to refer to the system programming procedures to find out which feature code is assigned to paging and then access it by pressing FEATURE + the paging code or assigning the paging feature code to an unused button.

Posted on Oct 24, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program the page button on my northern telecom phone


http://www.amctel.com (310) 397-9262 shows you how to set your Nortel, Norstar and Meridian button inquiry. Find out what is actually programmed behind that button. This video contains a special off for a $100 discount on your first service call in the greater Los Angeles and Orange County area. Two-hour minimum to take advantage of this offer.

Mar 24, 2016 | Lands Phones

2 Answers

I used to be able to make announcements on an 18D by pressing intercom and the top right button. After a power outtage our phones have been different. How can I program or make announcements again?


Call in a pro. it sounds like you lost all your programming with that power outage.
Depending on your processor type, you may have to re-program teh entire system, or just restore a backup....

Sep 06, 2011 | Lucent PARTNER18 Corded Phone

1 Answer

How can i use the buttons of panasonic kx-t7730 corded phone ?


The 12 buttons on the right can be used for personal speed dial numbers and features like paging. They are programmed by pressing PROGRAM dialing codes and STORE. An outside call would use an "access code" usually "9" plus the number. Paging is 330.

The 12 left side buttons are very valuable as they have lights. You can store lines, extensions, and features that require lighted buttons, such as CID Indication or VM functions. They are programmed by PROGRAM the button a code the feature and STORE. For example, lines are programmed with 0 + line Extensions with 1 + ext and CID Indication System with 96 or the 9x voice mail commands.

Your OM or User's manual has a section on flexible button assignment with the codes and buttons required to do the programming. In my TA-824 200-OM it's in section 3.1.3.

Carl

Feb 19, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

I do not know how to turn off internet explorer in order to install adobe flash player


Observe the internet pages for the three buttons at top right corner. Click the last button at top of internet page that has X also knwn to close pages.

For example, the three symbols are miniature immetations of the internet page click buttons. _ & X

Click the following sign should minimise mometarilty the internet page. _

Click the following sign should exit the page entirely. X

Important notes

Several reasons require to exit the internet explorer to download another prorgam acquirable from the network. First the internet connectivity least has enough bandwidth to display both programs of browser and new program requsting download. Once the internet has allowed to locate and display the download page, simple click the exit button on the internet explorer page only. The page should exit retaining the download button. A click button on the download bar should allow the download to commence. Until the download program has been completed, the intermnet explorer pages should not be attemped to display by user else the download is haulted to currupted requring reinstallations. Once the anunterrupted download has been achieved, the messages button may request to power exit the entire network programs for the computer to reconfigure to discover the new settings. The computer some instances may require power shut down completely for the entire new features to take effect on the first start after download was attained.

Feb 05, 2011 | Computers & Internet

1 Answer

I have Platinum 18 on windows Vista. For some reason the page turner button on the bottom of the screen says For Help press f1 (not go to page or add pages). So I cannot turn pages unless I do it by going...


This worked for me ... I got this from going through the Help/Online Help from within the program.

Complete the following steps:
With a multi-page project open on the program workspace, click File in the menu bar and choose Print Preview.
In the Print Preview window that appears, click the Zoom In button and click Close to return to the project. The Page Turner button will now display.

Jun 20, 2010 | Broderbund PrintMaster Platinum Version 18

1 Answer

I need to know how to page another extension. Our Avaya phones do not have the intercom button. I thought there should be a function code to program a button for Intercom, but I'm not finding it. I need to...


There are 2 buttons right below Line 1 and Line 2. Those are both intercoms.

When paging a phone, you just insert a * (star) before the extension number.

SO, Intercom*11, will page extension 11

To program on a button, feature 00, press the button you want to program, then press the left intercom and *xx (where xx is the extension number)

As far as paging all the phones, you will need to have them in a calling group (1-4), hten you can page the group to page them all.

Jan 19, 2010 | Avaya 700340193 Corded Phone

1 Answer

PROGRAMING PAGE FEATURE ON M7310


First try this. Press FEATURE 601. If that pages all speaker, then I remembered it correctly. If not, Try 6xx 602? 612? until the display says PAGE ALL. That's the feature code.

Now, pick a button. Press FEATURE *3 the button and dial FEATURE 6xx with xx being the code you used above.

Now when you press that button, it will page as you desire.

Carl

May 21, 2009 | NorStar M7310 Phone

1 Answer

1 "how do i program the Web/Home button at


you go to your setting of your computer and then select network button and find the network home page and you just type your favorite home page then restart your computer.. after you restart you computer, click the browser button to start on your computer... and see your home page is just change..

May 09, 2009 | Microsoft Basic Keyboard 1.0A PS/2 KEMIBA

1 Answer

Programming Page Button


You could look in the station user's guide and program paging. This may work, or not, if you're paging internal and outside do this:
From your phone press Feature 00 the button and then Intercom *70.

If you don't want all the idle phones in group 1, but just the outside speaker, press 70 alone.

I'm not positive, but you may have to delete the button in centralized programming if it is already assigned a "CO" line.
Centralized programming is done from extension 10 or 11 and involves the system manual and knowing where the overlay buttons are.

Post back if you need a basic Partner ACS manual or try www.avaya.com for system manuals.

Carl



Feb 20, 2009 | Avaya Corded Phone avaparp18d

1 Answer

Lost manual and can not page the warehouse .....


Well, before you program the button, you need to see what you have to program. At a phone whos paging button works, press FEATURE 00, and touch their paging button.
If it says loudspeaker page....GOOD. If not, repost with what it says.

FOR LOUDSPEAKER PAGING: From your phone
Feature 00
Touch the paging button, press LEFT intercom and 70
Feature 00 to get out of programming.

Done.

Mar 24, 2008 | Lucent PARTNER18 Corded Phone

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...