Question about Washing Machines
You need to check if power is going all the way to the board. The only way to do this is to trace the power cable to the board. When you have located now comes the tricky part. You will need a current tester. You will need to put the probes of the tester into the power cable (one on each side) and switch the power on to the machine. I would only recommend doing this if you are very competent in electrics. If you do this and find a full 230 going to this plug then it means you're board is dead and its new machine time if you are not covered by your parts guarantee. If there is no power going to the plug then you need to recheck back down the line
Posted on Oct 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have found what you looking for and i hope this help's yo. let me know.
F/06 Drive Motor Tachometer Error
The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes.
Best regards Richard
Posted on Dec 12, 2009
Tips for a great answer:
Sep 09, 2017 | Whirlpool Washing Machines
Aug 09, 2013 | Whirlpool Washing Machines
Dec 03, 2012 | Washing Machines
Jun 11, 2012 | Whirlpool Washing Machines
Apr 12, 2012 | Whirlpool Washing Machines
Mar 15, 2010 | Whirlpool Washing Machines
Aug 18, 2008 | Washing Machines
Jul 18, 2008 | Whirlpool AWM6100 Front Load Washer
Jan 20, 2008 | Whirlpool AWM8143 Front Load Washer
Dec 12, 2017 | Whirlpool Washing Machines
300 people viewed this question
Usually answered in minutes!