Question about Ovens

Open Question

REPLACING A SENSI TEMP AND REG BURNER COILS ON 1970 CIRCA GE STOVE TOP.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1314 Answers

SOURCE: Kenmore Stove (coils)

if the timer is on hit cancel or reset then hit clock and then use up and down arrows to set them also locate the serial plate and give me the mod num will be a buch of num like 106.48062890 around the bottom drawer on the body of the range or around the oven door if the eoc or clock isnt lit go turn the breaker off for 5sec and let me know

Posted on Dec 29, 2007

SOURCE: replacing glass top on stove

I also have a ge spectra with a broken glass.

Posted on Jun 26, 2008

TheMobilian
  • 8220 Answers

SOURCE: Oven burner flame is low

0000000.jpgOn top of that safety valve is a nut. Get a good fitting wrench. Turn on the oven and use that good fitting wrench on that nut. Turn it counterclockwise till the flame comes up about midways of the flame spreader. Don't get the flames too high. Midways of the spreader now. LOL

Posted on Jan 02, 2009

ButtFuzz
  • 463 Answers

SOURCE: top of stove hot when oven on

I suspect this may have been happening for quite some time and you may never have noticed it. MANY ovens vent near one of the stove eyes. If you lift the cooktop for 'servicing', I bet you see the little vent. It is usually in the back right underneath the cooking surface. Check to make sure it is not blocked, clogged or has rusted out/off.

Posted on Mar 04, 2009

EllaWatson25
  • 725 Answers

SOURCE: Bottom burner in my oven barely comes on, in turn,

You need a new t-stat control. Your element is fine. Give us a call with your complete model number and we'll get the right part out to you asap to get you ready for the winter.

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Temp control knob loose on old Frigidaire oven


my best guess its A Frigidaire wall oven, circa 1966-1970,

unsafe to use at any time if the temp controller trips the circuit breaker

could be the oven thermostat causing the trip as well

if Frigidaire are still in business

You will need to ask an electrician to fit a /tested used controller or new superseded part temp controller and knob

Oct 11, 2016 | Frigidaire Ovens

1 Answer

We have a GE gas oven/stove top and the stove top is lighting as well as the broiler but we can not get the oven to heat up. What do you suggest we try?


i just moved and our stove in the new place doesnt bake things right. it seems that the top coil doesnt come on. its very difficult to bake anything. seems to come up to temp for pre heating, but only the bottom coil comes on. If you put it on broil, then the top coil gets hot. that works fine. tired of burning pizzas and biscuits. can anyone help with a cheap fix? dont have alot of cash.

Nov 12, 2009 | GE Ovens

2 Answers

Hotpoint Glasstop Stove - Burner turns on by itself


I have a GE stove which I purchased in 2004, and it is doing the same. I heard beeping coming from the kitchen in the middle of the night . I went to the kitchen and the oven was on by itself. I have been unplugging it when not using it. Maybe this could be a recall.

Oct 08, 2009 | GE Profile JKP18 Electric Single Oven

1 Answer

How do you light the pilot on a GE stove The top of the stove works


Hi, If this model has a standing pilot, use a lighter and put the flame to the back center next to the burner assembly. Most newer models have electric ignitors now. It is fastened to the burner assmbly on the laft side.
If this an electric ignitor, turn the oven on and see if the ignitor glows. These ignitors are a very common problem and will probavly need replaced.
Please let me know if I can assist youu further.

Vic

Jul 03, 2009 | GE JGRP17 Gas Single Oven

1 Answer

Oven burner flame is low


0000000.jpgOn top of that safety valve is a nut. Get a good fitting wrench. Turn on the oven and use that good fitting wrench on that nut. Turn it counterclockwise till the flame comes up about midways of the flame spreader. Don't get the flames too high. Midways of the spreader now. LOL

Jan 02, 2009 | Ovens

1 Answer

Stove top element overheats


HI thanks for your question. the problem is with the burner switch. replace the switch. thanks the appliance doc. please rate my answer. thanks

Oct 11, 2008 | Ovens

1 Answer

Replacing glass top on stove


I also have a ge spectra with a broken glass.

Jan 14, 2008 | GE Profile JTP18 Electric Single Oven

1 Answer

Oven won't stay hot


http://www.lieffcabraser.com/profileovencomplaints.htm 
the digital control for the JPT-18 and customer are trying to have GE replace them. It is called the F7 error
Click the link above to see more about the problem. GE wants the customer to pay for the error. Hope this helps. JT

Oct 23, 2007 | GE Profile JTP18 Electric Single Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

ashburton

Level 3 Expert

417 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...