Question about Saeco Vienna SuperAutomatica Coffee Maker/Espresso Machine

Open Question

Machine stops and displays solid red light after dispensing 1 shot. Turned machine off and back on, and able to dispense another shot, then stops again ???

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Saeco Incanto Flashing Red Bean Light

I found a machine in my dentist's office with this exact same problem. I'm not familiar with the model, so I downloaded a manual for the closest model I could find online (the Sirius), and it offered no help -- but in 8 languages!

I ended up just pulling the drip tray, pulling the box where the grounds end up, and re-inserting the assembly (all while the machine was on.) When I buttoned it up again, it worked.

Hope this helps (although I can see how it might not...)

Posted on Nov 15, 2007

Ad
  • 1 Answer

SOURCE: Saeco Caffe Charisma lights do not stop flashing

I had the this same issue and made a post to this thread, in that post I had this solution to my conditions.

The combination of actions that seem to work was turning the Saeco on while the steam valve was already open and selecting hot water once the Saeco was powered on. The prime light went out, I closed the steam valve

Posted on Jul 20, 2008

  • 1 Answer

SOURCE: red water light is flashing

I read through many old posts and found the answer I was looking for. I turned the hot water nozzle on for 45 seconds and the problem went away.

Posted on Apr 11, 2009

  • 2 Answers

SOURCE: Limited water output (saeco vienna superautomatica model year 04)

I had the same issue with the same machine for about the same amount of time. I bought a new pump and a mainenance kit. I found tons of calcium build up inside the boiler, and the bolts to the boiler were rusted to the point where they broke off. The old pump was very noisey and failing to pump water through the clogged boiler. After cleaning out the boiler, replacing the o-rings on everything, and a new pump, the machine is like new.

Posted on Jul 10, 2009

  • 1 Answer

SOURCE: new Saeco Odeo Go has solid red exclamation mark, doesn't budge

You have to 'manually' prime the pump: When the red exclamation mark shows, press the water switch on the right side (the picture of the water drip), then open up the steam nozzle and let the machine pump hot water into a cup until the red light goes out.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2 red lights on CPU board


I will assume that you have the first on/off switch turned on and the one for the element is not turned on. The machine is saying it is not ready to dispense hot water or steam.

Apr 20, 2014 | Rancilio Classe 10 Espresso Machine

1 Answer

GE Refrigerator Ice and Water dispenser stopped working after power outage


More than likely the user interface board that controls that portion of the machine is probably bad, or, worse case scenario the main control board which has the overall say so for the machine has gone out which isn't uncommon either. My best advice is if your going to do it yourself buy your parts from www.repairclinic.com because of their return policy which you can return any part you bought even if installed/

May 19, 2012 | GE GSH25SGRSS Stainless Steel Side by Side...

1 Answer

Hello! my 102534 gaggia esppresso machine has liquid/espresso dispensing after the 'espresso dispenser' has been turned off. if i turn the entire unit off, it does eventually stop. i've have...


HI JULIE,....MAKE SURE YOU ARE NOT FILLING THE WATER DISPENSER PAST IT'S OVER-FLOW...THERE IS A HOLE TOWARDS THE TOP...YOU DO NOT WANT TO FILL PAST.

HOPE THIS HELPS!

Sep 03, 2011 | Gaggia 102534 Espresso-Color...

1 Answer

My indesit idl has stopped working. The red light comes on but none of the green setting lights come on - any ideas


Led 1= Prewash / 3hr
Led 2= Wash / 6hr
Led 3= Rinses / 9 hr
Led 4= Drying / 12hr

LED. illuminated
1 = Overflow ( water in base )
tip machine back. does water come out? if so you have a leak, possibly from bottom spray arm nut or loose salt pot. see if they are loose. if not, remove the base, put dishwasher on a block of wood, shine torch underneath to see where the leak is.

1+2 = Pump timeout, or Software recognition error ( timer not programmed, wrong keypad)

1+3 = Circulation pump not working

2+3 = Not filling

2+4 = Heating circuit not working

2 = Solenoid valve 'broken'

3 = Thermistor (NTC) cicuit not working

4 = Temp not reached whilst heating ( poss NTC detached from casing).

remove door panel. ntc is attatched to the rear of dispenser, a little white thing with 2 black wires on it. refit to the clip on the dispenser.

It is usually necessary to 'reset' the machine after a fault code has been displayed. Resetting.
Switch dishwasher OFF, rotate the selector switch to STOP/CHANGE and switch on, after a few seconds the LEDS will go out enabling a new programme to be selected

Aug 20, 2011 | Dishwashers

1 Answer

Gaggia syncrony logic not dispensing water. Just drops pods and red light comes on. have cleaned brew unit shower screen and dispenser tube. still have the problem


Lubricate the brew unit with a food safe grease this should help.
The brew unit becomes stiff and fail to load up fully this stops the water being dispensed

Jan 18, 2010 | Gaggia Syncrony Logic 74884 Espresso...

3 Answers

New Saeco Odeo Go has solid red exclamation mark, doesn't budge


You have to 'manually' prime the pump: When the red exclamation mark shows, press the water switch on the right side (the picture of the water drip), then open up the steam nozzle and let the machine pump hot water into a cup until the red light goes out.

Jun 11, 2009 | Saeco Odea Go

4 Answers

Taylor 8756 ice cream machine clogs at face


i need to know where i may go to get directions to put this taylor 8756-22 ice cream machaine back togeather if you can help please e-mail me at johnjohnson1967yahoo.com thanks

Jun 01, 2009 | Taylor 632-33 Ice Cream Maker

1 Answer

Red water light is flashing


I read through many old posts and found the answer I was looking for. I turned the hot water nozzle on for 45 seconds and the problem went away.

Apr 10, 2009 | Saeco Magic De Luxe Espresso Machine

1 Answer

Machine does not stop after dispensing two shots of espresso


That kind of machine is pretty well engineered!Very solid and work on a basic deal.The problem could be just the simple on/off button.
The pump is controlled by the button and if the button don`t stop the machine still understanding you need more until you close the circuit.Sometimes coukld be also a loose wire.

In some way you are lucky because that machine have not electronic board so...less part.....less problem


Don`t forget to rate your experiene

Fabio

Nov 26, 2008 | Saeco VIA Venezia

2 Answers

Saeco Incanto Flashing Red Bean Light


I found a machine in my dentist's office with this exact same problem. I'm not familiar with the model, so I downloaded a manual for the closest model I could find online (the Sirius), and it offered no help -- but in 8 languages!

I ended up just pulling the drip tray, pulling the box where the grounds end up, and re-inserting the assembly (all while the machine was on.) When I buttoned it up again, it worked.

Hope this helps (although I can see how it might not...)

Nov 10, 2007 | Saeco Incanto Classic Espresso Machine

Not finding what you are looking for?
Saeco Vienna SuperAutomatica Coffee Maker/Espresso Machine Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

espressofixr

Level 1 Expert

16 Answers

just-ice

Level 2 Expert

75 Answers

83bj60

Level 1 Expert

22 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...