Question about Whirlpool GU2400XTP Built-in Dishwasher
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You might have something bouncing around in the wash pump inlet in front of the "chopper". Remove the lower arm and upper arm supply tube. Remove the screws then remove the screen, accumulator and inlet protector. You should see debris in front of the screen.
Posted on Dec 28, 2007
ngafm at your service
I believe the loud humming you describe is an electronic problem. And is not worth changing parts randomly and spending unnecessary funds in this fashion!
my advice is a hands on experience repair person that does this day in and day out!
Whirl pool units have many variables! and for the price of randomly changing two or three parts you could have a certified tech finished the repair at a lesser cost to you!
Unfortunately i can not be there hands on or I would be happy to do a hands on diagnoses for you.
Bless You ngafm.
Please leave me a good rating, before you sign off the site.
Ps. Let me know the end result and which electronic part was the culprit..
Posted on Sep 10, 2008
A loud high pitch whine while running the dishwasher means that there is something caught in the chopper assembly. To get to the chopper assembly you need to take the racks out and take the pump apart from the inside of the dishwasher. The chopper assembly looks like a metal grate with holes in it. And it might not even be stuck in the grate but somewhere in the pump area due to the water being pumped out, so the best idea is to take the whole thing apart and clean everywhere. However I do not recommend doing this unless you are completely certain you will remember where the screws and gaskets go, otherwise you risk damaging your pump or house from a leak or improper installation. You have been warned.
Posted on Jan 15, 2009
if you have a torx 20, and torx 15 screw driver, you an remove the screws from the top plate of the wash motor, and underthere youll see another t15 screw converingthe "chopper" assy, sounds as if a seed, of chicken bone, perhaps apiece of glass hasgottne down there
Posted on Jan 25, 2009
Tips for a great answer:
Dec 03, 2015 | Washing Machines
Apr 24, 2017 | Whirlpool WTW6400SW Cabrio Washer
Feb 07, 2012 | Whirlpool Washing Machines
Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...
May 15, 2010 | Washing Machines
Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer
Jan 25, 2009 | Whirlpool GU3600XTSY Stainless Steel...
Nov 16, 2008 | Maytag Atlantis MAV6000 Top Load Washer
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: