Stitching
posted by yourangleyes on Sep 25, 2007
when I try to sew with the machine, the stitches don't come out normal looking. They look like a big not of thread on the back side.
Solution #1
posted on Sep 26, 2007
WizMake sure you have threaded the machine properly and make sure the presser foot is up when you thread the machine so the thread goes in between the tensions discs, top tension should be about 5 but may vary slightly, make sure you have the bobbin in the bobbin case the correct way round, the thread should just pull through the spring with some resistence.
Ken
Ken
Was this solution helpful? Show your Appreciation by rating it:
Suggest a new solution for this problem
Post a New problem for Sew Pro QuickStitch SP-402 Mechanical
Email this problem
Post a New problem for Sew Pro QuickStitch SP-402 Mechanical
Email this problem
Can you Help with these Sewing Machines problems?
Sew Pro QuickStitch SP-402 Mechanical Sewing...
No manual
No manual
I cannot figure out how to... Answer This...
Sew Pro QuickStitch SP-402 Mechanical Sewing...
threading the bobbin
threading the bobbin
how do you thread a bobbin on... Answer This...
Repair Service
Find Sewing Machine Repairman Near You:
FixYa does not evaluate or guarantee the accuracy of any information provided through its proposed solutions,
posts, or Expert Assistance Sessions. By entering this site you declare you read and agreed to its Terms.
You may NOT copy or distribute the content that appears on this site without written
permission from FixYa Inc.
About | News
| Contact
| Find Products
| Find Cars
| Terms
| Privacy Policy
| FAQ
Tags | Blog | Repair Directory | Extended Warranty | Partners | Jobs |
Tags | Blog | Repair Directory | Extended Warranty | Partners | Jobs |