Question about Denon AVR 3808Ci Receiver

1 Answer

I have a Denon AVR-3808CI A/V receiver, a Samsung HL67A750 DLP TV, a Samsung BD-P1600 Blu-ray player, and a Motorola HDPVR for the cable signal. I have connected the Blu-ray player and HDPVR to the Denon using HDMI cables, then connected the Denon to the TV using a single HDMI cable. To get the best picture quality, I initially adjusted the TV's picture quality options (I purchased it before the Denon). Now that I have the Denon and cannot "turn off" the TV's video processor, I am not sure of which of the Denon's "HDMI Setup" adjustments to modify; i.e will adjusting the Denon's i/p Scaler, Resolution, Progressive Mode, Aspect or RGB Range settings conflict with the TV's settings (it has ~15 for video)? Do the Denon's video adjustments override any/all of the TV's video settings? This is my first exposure to HD "stuff" so I really appreciate your help. Thank you. Greg from Port Alberni, BC, Canada

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

You will have to disable one or the other. Most likely the source because not all disk"s will be recorded the same. If a disk was transfered from film to digital poorly, this will show up as a grainy look on your tv, not much you can do about that. I would set your tv the best possible and go with that, also if your tv is capable of 24fps use that setting.tweaktv.com can help you with your tv setting. Use Progressive Mode on you blueray and your dvd also.

Posted on Jun 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Denon AVR-988 receiver not working surround output when playing movie in my samsung blu ray BD-1400 player


Be sure in the menu setting that the audio analog/digital setting is correct for the blu ray setting. All try the factory reset as stated in owners manual

Feb 18, 2015 | Denon Audio Players & Recorders

2 Answers

No Audio


cant use both hdmi and opti outs try sum setting in blue ray but u nee dto plug all blue ray dish directto samsung hdmi then 1 master digital out form tv to sterio digital i n ok tell samsung your output also

Jan 20, 2008 | Sony STR-DG510 Receiver

2 Answers

How do I play a movie on my Samsung blue ray without a remote


Hi,

On fornt of the player you have the buttons for opreation.You can use these buttons to operate your DVD player with out remote.

I have attached a image for your BD-P1600 player so your reference

6c45bf6.jpg
1.DISC TRAY :Opens to accept a disc.
2.DISPLAY :Displays the playing status, time, etc.
3.Remote Control Sensor :Detects signals from the remote control.
4.OPEN/CLOSE BUTTON :Opens and closes the disc tray.
5.SEARCH/SKIP BUTTONS :Goes to the next title/chapter/track or goes back to the previous title/chapter/track.
6.STOP BUTTON :Stops disc playback.
7.PLAY/PAUSE BUTTON: Plays a disc or pauses playback.
8.POWER BUTTON :Turns the Blu-ray Disc Player on and off.
9.USB HOST:A USB memory flash stick can be connected here and used as storage when connected
to BD-LIVE. It can also be used for firmware upgrades and MP3/JPEG playback.
Thanx

Jul 26, 2010 | Samsung BD-P1600 Blu-ray Disc Player

1 Answer

HDMI - no output Samsung P1600 BD


the hdmi output generally needs activating through the menu system. im assuming you havent already done this.
connect it with whatever cable works and navigate through to the menu system to select the hdmi output.
failing that it might be the hdmi cable is an older cable not capable of supporting ver1.3

Feb 07, 2010 | Samsung BD-P1600 Blu-ray Disc Player

2 Answers

DVD playback distorted in Samsung BD-P1600 Blu-ray Player


i had this problem with mine, found fingerprints on discs, just cleaned the discs and no problem after that.

Feb 01, 2010 | Samsung BD-P1600 Blu-ray Disc Player

1 Answer

Contol Samsung Blu Ray BD-P1600 with Samsung remote


Compare the manufacturing dates and if remote is older, it is normal. If not, ask Samsung. Good chance

Oct 02, 2009 | Samsung BD-P1600 Blu-ray Disc Player

1 Answer

Denon Receiver AVR 1602 not playing Dolby Digital w/ Samsung BD


Dolby signals are passed via either an RF cable or optical link. Both the receiver and player need to have these switched on and that they are passing the correct signals. You clearly found the correct setting for the TV sound link. Now you just have to find the one for the DVD player.

Jun 02, 2017 | Denon AVR-3805 Receiver

1 Answer

Selecting a Blu-Ray Player


If Denon blu ray has coaxial or optical out for audio, then your Denon receiver will process this signal and will give you 7.1 out sound.

Jan 24, 2009 | Denon AVR-4802 Receiver

Not finding what you are looking for?
Denon AVR 3808Ci Receiver Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5047 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...