Question about Conair Weight Scale "Thinner" with Body Fat, Hydration, Bone Mass

1 Answer

What do the three numbers represent? Weight is obvious, but "f" and then the last one?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 59 Answers

I think this is the manual for the above mentioned product. Does it say f or BF? BF is % fat with in your body, although the techonolgy used is not too acturate, you can use it as a guide, to ensure the best possible acuracy be sure to use it at the same time of day preferably before drinking or bathing/showering. Usually first thing in the morning after you use the rest room is best. It uses electrical impedence to measure for the extra measurement features and these factors can skew the readings.

H20 would be water content, and

bone is bone denstiy which is important to keep take of espicially if you are an older female, or on medications that affect bone density. Although i am not sure how acurate the readings would be and highly reccomend if you are at risk for ostioparosis or any other diseases or on medications affecting bone desinties to check in with your doctor about testing and monitoring.

Posted on Apr 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I reset my Weight Watchers Scale WW37GD?

To Set:
1. Push the set button, you will get ------
2. Push the user
3. Push set again the user number will blink 3 times and show 0.0
4. Get on the scale- when it shows your weight push the set button. This is your start weight
5. Then it will automatically take 10% and show your goal.
6. Push the set button again this will set the goal

To Weigh:
1. Push the user number that you set up the P-? number will blink 3 times and show 0.0
2. Get on the scale it will show in this order
a. your weight now
b. your weight since the last time you weighed
c. The total loss toward this goal
d. Total needed to reach your goal

Nov 13, 2017 | Weight Watchers Health & Beauty

1 Answer

Lost my phone can I receive replacement

Contact a TracFone service representative. Dial 1-800-867-7183 to report your SafeLink lost or stolen. Inform the representative of the estimated last date of use. Give a detailed description of where you may have lost the phone or how it got stolen.
  • Provide the representative with your mobile device's serial number or ESN found on your activation card. If you cannot locate the activation card, provide the representative with the cell phone number.
  • Request to keep your old phone number or apply for a new one. After the representative reports your cell phone lost or stolen, request that a copy of the report be sent to your active email address. Check your email address to make sure that you have received the email and a cell phone replacement confirmation number.
  • Expect the replacement SafeLink TracFone mobile device to be mailed to you within three to five business days, without cost. Check the contents upon arrival to make sure that the replacement cell phone, battery, charger, SIM card and activation card are intact.
  • To activate, call the number provided on your activation card. Provide the serial number, found on the activation card, and the SIM card code, found on the back of the SIM, to complete the activation process.
  • How to Replace SafeLink TracFone eHow

    May 06, 2016 |

    1 Answer

    I have to convert 75,893,938 into word form what is the easiestt way to remember how to do this??

    Write the first number out( Seventy Five) Then at the first comma write out what it represents (million) Then write out the next number (eight hundred ninety three) then what the next comma represents (thousand) then the next number (nine hundred thirty eight). Put it all together and you get your answer (seventy five million eight hundred ninety three thousand nine hundred thirty eight) its easy if you break it down section by section and remember what each comma represents. I hope this helped you out

    Sep 01, 2011 | Office Equipment & Supplies

    1 Answer

    How can i tell the year my kirby diamond ultimate g was built?

    Look at the serial #. Disregard the first number. The next two represent the year, the next two the month, and the next two the day. The last three are the daily sequence.
    Example: 5021203456, would be the 456th machine finished on Dec. 3, 2002.

    Jul 26, 2011 | Kirby Ultimate G Bagged Upright Vacuum

    2 Answers

    I have a very simple question. I have a 1990 Nissan Hardbody 5-speed and I need to know what kind of oil would be best to use. Like 10w-30, 10w-40, etc. Thanks for your time.

    With any multi viscosity oils the first # represent the viscosity(thickness) at start up temp. The second # represents the viscosity at operating temp. The smaller the # the less the viscosity. So a 10w30 starts at a 10 weight and turns into a 30 weight. The 10w40 starts at a 10 weight and turns into a 40 weight. the w stand for winter. Most people use multi viscosity oils. While some don't likel them they opt to use a SAE30 (straight 30). It is 30 weight all the time. But in most areas in the U.S you should use a multi viscosity oil

    May 31, 2011 | Nissan Pickup Cars & Trucks

    1 Answer

    If you have a five gallon bucket and a three gallon bucket and there are no measurement marks how do you calculate a perfect four gallons

    Hello! Fill the five gallon bucket...Dump its contents into the three gallon bucket until it is full...leaving two gallons in the five gallon bucket...fill the five gallon bucket...Pour the five gallon bucket into the three, filling it...Tthis leaves exactly four gallons in the five gallon bucket...


    I’m happy to help further over the phone at

    Mar 22, 2010 | Garden

    1 Answer

    Recommended Engine Oil

    You can keep using that oil with no problems. Most people don't really understand what the numbers on the bottle actually mean. There is a really long definition but here is the short version: The first number represents the pour point of the oil at freezing (@32 degrees F).
    The second number represents the protection offered, compared to a "straight weight" oil eg: 30, 40, 50, at 212F degrees. Therefore, at freezing, your oil will pour (or flow) like a 20 weight oil, and give wear protection of a 50 weight oil at 212 degrees.
    The quality of any oil is based upon the chemical makeup of the base oil, some have a high parafin content and are prone fo sludge formation, while better ones do not and tend to last longer. The ability to "change weights" with temperature is controlled by an additive "package" which is part of the product formula, as are other features such as anti foaming and the ability to keep particles in suspension.
    If you stay with better oils such as Castrol, Quaker State, Valvoline etc. You will have no problems. (especially because in your area you don't go from sub zero to 100's).
    Don't forget to add a quality filter to your oil changes. This is as important as your oil!!!
    Good luck with your car!!!

    Apr 28, 2009 | 2001 Hyundai Accent

    1 Answer

    Transfer info from the digital weight scaleto quickbooks

    You would need to add an criteria or the rule, like barcode length or type. Than is the the scanner able to understand which barcode should be handled by the specific rule.

    Dec 03, 2008 | Symbol LS2208 Handheld

    1 Answer

    Conair WW41 Scale

    To totally reset the scale and remove any old data in the users take battery out for 2 hours.

    To use the USER functions:
    Tap scale to turn it on
    When you see "0.0" press
    Press SET button. "P-1" will appear and blink
    Use UP/DOWN button to select a user number
    once desired user number (1-4) appears press SET button to confirm

    when 0.0 appears step on scale this will enter your starting weight
    press SET to confirm
    scale automatically sets a goal weight of 10% below starting. you can raise or lower it by using arrow buttons-Press SET to confirm

    Tracking weight
    tap, see 0, select user number. Scale displays start weight, then goal weight then 0.0 and you weigh yourself. In the smaller windows it will display last weight and the difference between current and last weight then diff between current and start then diff between current and goal

    Aug 24, 2008 | Health & Beauty

    Not finding what you are looking for?
    Conair Weight Scale "Thinner" with Body Fat, Hydration, Bone Mass Logo

    Related Topics:

    385 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Conair Health & Beauty Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Level 3 Expert

    1625 Answers


    Level 3 Expert

    5670 Answers

    Are you a Conair Health and Beauty Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides