Question about Motorola Lands Phones
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: I have a GE Cordless
With the indulgence of Compurepair, ivofreax10 and ser71....
If I understand your concern right, on your GE Cordless:
1. red light flashing onincoming call,
2. replaced the battery;
3. displays "READY", "TALK" or "UNAVAILABLE";
4. receive audio messages on the answering machine;
5. receive incoming calls.
a. no dial tone;
b. no ringing;
b. no dial out.
Things you can try:
i. unplug the base from the mains for over an hour to reset the system;
ii. once powered back, place the handset to the base unit's cradle for half a minute to "pair" the two. Pls try redoing the setup steps again;
iii. check if your home telephone wiring uses the 4 wire. the GE to my understanding is 2 wire only. If you have used the phone previously without this issue, pls disregard.
iv. if the handset battery is new, pls try charging overnight.
v. verify/try that this is the only phone connected to your phoneline;
vi. verify that Ringer in the handset is set to ON.
Resetting the system can and may delete all stored information.
If all else fails you may need to contact GE at 1-800-448-0329.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
Posted on Mar 05, 2008
SOURCE: No dial tone on handset
It may not be registed with the main unit. You may need to register the handset. With my uniden all i have to do is put it in the main base until it says what handset it is (it should be a number).
If you have any questions please dont hesitate to ask
Posted on Dec 02, 2008
SOURCE: uniden 5.8Ghz phone.
You need to reset the main base unit. Unplug the power from the back of the base. While the power is disconnected, press and hold the delete key while reconnecting the power. Wait for a long beep tone. When the display shows 88 or P, press play button one time. If you have a phone without an answering machine, disconnect the power from the back of the base, press and hold find hs button while reconnecting power.
Posted on Mar 17, 2009
Tips for a great answer:
May 21, 2008 | Uniden Cordless Phone
Oct 24, 2011 | Lands Phones
Mar 22, 2011 | Clarity C410 Cordless Phone
Apr 25, 2010 | Cell Phones
Sep 16, 2009 | Motorola Mobility RAZR V3
May 28, 2009 | Uniden Cordless Phone
May 25, 2017 | GE 27957GE1 Phone
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: