Smeg oven diplaying an "A" in display

Check if the oven timer is on auto mode. If it is, turn it on to manual mode .
Remove the power cable from the outlet and wait for 20 minutes. As you plug your oven back in, the oven timer should reset as well .
Hold the timer buttons down at the same time to reset the timer .
Meter the thermostat out and see if it's open circuit .
Take the top off and inspect the selector switch and see if there are any signs of burning on the switch .
How to Repair ' Smeg duel fuel range cooker A1-7 Oven not working. (how-to-repair.com)

Hello Andrew from another one :>D

It sounds like you had a mains voltage issue whilst you were away.

Disconnecting from the mains for 5 minutes will reset it. If that doesn't fix it, it's a Smeg, you will need a Service Call and probably a new control board.

This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.

• If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
• When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.

If this helped you why not get me a beer? Paul is from the Naturally he would appreciate beer How to Repair Home...

Hi
there must be a button or switch on the panel to turn it off

Use a flashlight and look into the hole from where you normally feel hot airflow. Locate the hook holding the door on the left side. Using a thin screwdriver or a knife gently push the hook to the left. Voila! The door is open and functions are back working normally. Also known as Error 4 interlock problem. This will depends on the model of the oven

Is the hob seperate from the oven? if it is then I suspect the problem is witb the oven, you need to check the supply to the oven to make sure you have got voltage, if you have then the prob is within the oven, and this could be one of several things
Some single ovens are sometimes plugged into a normal socket, in which case you need to check the fuse in the plug.
Hope this helps.
Plz leave feed back.
Ta.

check stat is not open circuit and check selector switch not damaged

clock can be bypassed. you will have to get at the clock connections though.
you will see a recangular box on the clock pcb which is in fact a relay. next to it are two connections with fairly heavy wiregoing to them. join these together and the clock is then bypassed. you can get female to 2-male connectors which are very convenient for doing this. i must have bypassed hundreds of clocks over time

your clock need a reset you need to turn it off and back on then hold in your manul button it looks like a hand and the + that should then be ready for you to cook

Try www.smegtech.com/site/smeg/pdf_libretti/914772524-GB.pdf section8